Peraso 2026 Q3 Earnings Call
Review the key takeaways and the transcript of this earnings call.
- 3rd quarter 2026 total net revenue was $0.3 million, compared with $1.3 million in the prior quarter and $3.2 million in the 3rd quarter of 2025; product revenue was $0.3 million.
- Gross margin was 78.5%, compared with 63.7% in the prior quarter and 56.2% in the year-ago quarter, primarily reflecting a more favorable millimeter wave product revenue mix and an approximately $55,000 one-time reversal of an inventory accrual.
- GAAP operating expenses were $2.9 million and non-GAAP operating expenses were $2.7 million; GAAP net loss was $2.7 million, or $0.18 per share, and non-GAAP net loss was $2.5 million, or $0.16 per share.
- Adjusted EBITDA was negative $2.4 million, compared with negative $2.0 million in the prior quarter and negative $1.0 million in the 3rd quarter of 2025.
- As of September 30th, 2026, cash was approximately $0.6 million, compared with $3.3 million as of June 30th, 2026.
- Peraso completed a $10 million strategic investment from Nant Capital in late October; following the investment, the company had approximately 20.9 million common stock and exchangeable shares outstanding as of the call.
- Peraso received approximately $0.1 million of net proceeds from its committed equity facility in the 3rd quarter of 2026 and approximately $1 million subsequent to quarter end.
STOCKNOW INSIGHTS
Continue with outlook and guidance.
Log in to unlock executive comments and Q&A highlights.
Log in for the full summaryStockNow uses AI to translate and summarize earnings calls. Accuracy and completeness are not guaranteed.
Transcript
Preview the first fifteen paragraphs, organized by speaker.
As a reminder, this conference call is being recorded today, Thursday, November 12th, 2026. I would now like to turn the call over to your host for today's conference call, Mr. Kevin Liu.
Please go ahead. Good afternoon, and thank you for joining today's conference call to discuss Peraso's third quarter 2026 financial results.
I'm Kevin Liu, Peraso's incoming interim CFO, and joining me today is Ron Glibbery, our CEO. Today, after the market closed, we issued a press release and related Form 8-K, which is filed with the Securities and Exchange Commission. The press release and Form 8-K are available on Peraso's website at www.perasoinc.com under the Investor Relations section. There is also a slide presentation that we will be using in conjunction with today's call that may be accessed through the webcast link on the IR website. As a reminder, comments made during today's conference call may include forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended.
All statements other than statements of historical fact could be deemed as forward-looking. Peraso advises caution and reliance on forward-looking statements. These statements include, without limitation, any projections of revenue, margins, expenses, non-GAAP gross profit, non-GAAP gross margin, non-GAAP operating expenses, adjusted EBITDA, non-GAAP net loss, cash flows, or other financial items, including anticipated cost savings, as well as any statements concerning the expected development, performance, and market share or competitive performance of our products or technologies. Any statements regarding the sufficiency of the company's capital resources, any statements regarding customer demand forecasts and concentration risk, and any statements related to prospective future financing arrangements or capital transactions, and the valuation or pursuit of strategic alternatives. All forward-looking statements are based on information available to Peraso on the date hereof.
These statements involve known and unknown risks, uncertainties, and other factors that may cause Peraso's actual results to differ materially from those implied by the forward-looking statements, including unexpected changes in the company's business. More detailed information on these risk factors and additional risk factors are set forth in Peraso's public filings with the SEC. Peraso expressly disclaims any obligation to update or alter its forward-looking statements, whether as a result of new information, future events, or otherwise, except as required by applicable law. Additionally, the company's press release and management statements during this conference call will include discussions of certain measures and financial information in terms of GAAP and non-GAAP. With respect to remarks on today's call involving non-GAAP numbers, unless otherwise indicated, referenced amounts exclude stock-based compensation expense and the change in fair value of warrant liabilities.
These non-GAAP financial results, definitions, and the reconciliation of the differences between them and comparable GAAP measures are presented in our press release and related Form 8-K, which provide additional details. For those of you unable to listen to the entire call at this time, a recording will be available on the Investor Relations page of our website. I will now turn the call over to our CEO, Ron Glibbery, for his prepared remarks.
Ron? Thank you, Kevin. Good afternoon, and welcome to everyone joining us on the call and webcast.
We appreciate you taking the time to be here today. As noted in our press release this afternoon, our third quarter results reflected the previously indicated headwinds from dynamics in the fixed wireless access market. That said, we have begun to see tangible evidence of renewed customer demand more recently, and we expect an initial recovery highlighted by sequential revenue growth in the fourth quarter. While the broader market dynamics have been challenging in recent quarters, we have remained focused on the areas of the business that we can control. Notably, we have maintained operational discipline and kept overhead spending well-controlled, as well as taken measures to reinforce the resilience of our supply chain.
We have also continued to make meaningful progress toward expanding and advancing new customer engagements that we believe will be key to unlocking renewed future growth. Flipping to slide four. As a reminder, and for those newer to our story, there are three primary target end markets that we believe have a unique need and opportunity to benefit from Peraso's 60 GHz technology. The first market is fixed wireless access, which remains our largest and most mature market, and where we continue to hold a leadership position with commercially proven technology. The second is defense and tactical communications, where the inherent stealth and jam-resistant characteristics of 60 GHz are generating expanded interest across both airborne and ground-based applications. Lastly is autonomous edge AI, where high-bandwidth, low-interference connectivity is required to support dense clusters of robots and other autonomous platforms.
Across each of these markets and applications, 60 GHz millimeter-wave technology can overcome fundamental limitations encountered with conventional wireless solutions that operate in lower frequency bands, particularly where capacity, interference, reliability, or security are critical to overall performance. Today, we have active engagements on a combination of new and existing opportunities to leverage Peraso's proven 60 GHz technology across all three of these growing end markets. Turning to slide five. Fixed wireless access again remains our largest and most commercially proven market. Peraso has been shipping to customers in this market for over a decade. As I alluded to in my opening remarks, purchase order activity across our fixed wireless customers has been more irregular than usual throughout most of 2026. This has been largely due to elevated memory prices and the constrained supply of other components that are required to build and ship finished products.
Although we believe it will take at least several quarters for recent market dynamics to fully normalize, we have begun to see tangible evidence of renewed customer demand. Notably, in October, we received a production order of more than $2 million in support of a customer's 60 GHz fixed wireless access deployment. This represents the largest fixed wireless order that we've received in six quarters and is consistent with our view that customer demand is beginning to reemerge. Shipments to fulfill this customer's order are expected to continue through mid-2027, at which point additional orders could follow.
With diverse and long-held market acceptance of our 60 GHz technology for fixed wireless access deployments, we are confident that additional renewed demand will emerge in the coming quarters as other network operators and service providers look to leverage cost-effective alternatives to fiber for delivering multi-gigabit broadband in dense urban and suburban environments. More broadly, I want to briefly highlight recent public commentary from a major U.S. carrier that further validates the longer-term potential for millimeter-wave spectrum in fixed wireless access. As one data point, Verizon's CEO indicated on their most recent earnings call that the company has developed an innovative approach to utilize its substantial millimeter-wave spectrum holdings to deliver one gigabit per second fixed wireless service in metro areas. Over time, Verizon's goal is to expand the number of premises that can receive one gigabit speeds by incremental 10 to 15 million through fixed wireless access.
The company's CTO subsequently reinforced this by noting that millimeter-wave has found a second life to support fixed wireless access ambitions and that its role is expected to remain relevant over the long term. With no intention of indicating anything specific about potential future engagements with this carrier, I want to point to the comments because they underscore broader industry recognition that higher capacity millimeter-wave can complement both mid-band spectrum and even fiber as operators pursue greater network density and performance. The associated value proposition for 60 GHz technology is even higher for connectivity in congested and capacity-constrained environments. Looking at slide six. Beyond fixed wireless access, we are continuing to see increased interest and expanded engagements to utilize 60 GHz technology for unmanned aerial systems and broader defense communications.
Modern UAV operations require high-capacity, low-latency links that can support command and control, high-definition video, sensor data, and inter-drone coordination, while also remaining difficult to detect, intercept, or jam in contested environments. Delivering this combination of requirements simultaneously is challenging to begin with, but it becomes exceptionally difficult to achieve within the limitations of traditional sub-6 GHz radio links. Alternatively, 60 GHz millimeter-wave technology is ideal for addressing these collective challenges with its highly directional adaptive beamforming capabilities. By focusing communication signals into narrow, steerable beams of energy rather than radiating a broad signal, these links are able to achieve multi-gigabit throughput with inherently low probability of signal intercept, detection, and/or jamming. Additionally, atmospheric oxygen absorption further confines the signal, limiting propagation beyond the intended path.
These attributes make 60 GHz uniquely well-suited for a broad array of tactical defense applications, from secure command and control and identification friend or foe, or IFF, to more complex mission objectives that require resilient connectivity in GPS-denied or electronic warfare environments. During the quarter, we formally introduced our PRM2145 jam-resistant communications module. Purpose-built for UAV and defense platforms, the new module leverages Peraso's proven 60 GHz platform in a compact, lower power form factor optimized for the size, weight, and power constraints typical of airborne systems. This solution is specifically designed to support robust command and control links, high-definition video transport, ISR data, IFF comms, and drone-to-drone networking. We were excited to showcase these capabilities at the annual UAV Technology Conference in September, where the team observed heightened interest in jam resistance and high-capacity wireless solutions for next generation's unmanned systems.
FULL TRANSCRIPT
Continue the full translated transcript in StockNow.
Log in to unlock every statement, the English original, and speaker-by-speaker history.
Log in for the full transcriptCall participants
3 people spoke on this call — only 2 are shown here.
PARTICIPANT LIST
View participant details in StockNow.
Log in to see executives and analysts, their roles, and complete speaking history.
Log in to view all participantsKeep exploring
