Beta Technologies 2026 Q3 Earnings Call
Review the key takeaways and the transcript of this earnings call.
- Third quarter 2026 revenue was $17.7 million, BETA Technologies' highest quarterly revenue, up approximately 98% year over year and more than 50% above the midpoint of guidance.
- Year-to-date revenue reached $42.5 million, exceeding the low end of full-year guidance of $42 million to $50 million.
- Operating expenses were $140.5 million, including R&D expenses of $90.5 million and G&A expenses of $50 million; adjusted EBITDA was negative $97.4 million, better than the guided range of negative $115 million to negative $125 million.
- Year-to-date adjusted EBITDA was negative $305 million, compared with full-year guidance of negative $400 million to negative $445 million, and quarter-end cash and cash equivalents were approximately $1.3 billion.
- Revenue growth reflected increasing component deliveries, partnership programs, infrastructure revenue pulled forward by EIPP, and integration and flight-test support for third-party aircraft; management said revenue was all organic, with no inorganic revenue through acquisitions.
- BETA reported more than $4 billion in commercial aircraft backlog, with over 1,000 aircraft in firm and option orders backed by financial commitments, and a separate $1 billion backlog in its components business.
- BETA crossed a quarter million nautical miles of electric flight and reported 168 charging sites, ahead of its year-end target of 150; it launched 6 of 7 EIPP programs.
- BETA received an FAA Market Survey Airworthiness Certificate for the ALEA A250 on October 16 and flew a 34 nautical mile vertical-to-vertical market survey flight four days later.
- The CX-300 flew at the Miramar Air Show, and BETA is assembling its second hybrid VTOL aircraft, with components for a third demonstration aircraft coming together.
STOCKNOW INSIGHTS
Continue with outlook and guidance.
Log in to unlock executive comments and Q&A highlights.
Log in for the full summaryStockNow uses AI to translate and summarize earnings calls. Accuracy and completeness are not guaranteed.
Transcript
Preview the first fifteen paragraphs, organized by speaker.
Hello, everyone. Thank you for joining us, and welcome to the BETA Technologies Third Quarter 2026 Financial Results Conference Call. After today's prepared remarks, we will host a question-and-answer session. If you would like to ask a question, please press star one on your telephone keypad. I will now hand the call over to Devon Rothman, head of investor relations.
Please go ahead. Thank you, operator, and good morning, everyone.
Thank you for joining us for BETA Technologies Third Quarter 2026 Earnings Call. Joining me today are Kyle Clark, our founder and chief executive officer, and Herman Cueto, our chief financial officer. Following their prepared remarks, we will open the call for Q&A, where Kristen Costello, our head of government and regulatory affairs, will also join us. Earlier today, we issued a press release announcing our third quarter 2026 financial results, as well as an investor presentation, which are both available on the investor relations section of our website. Before we begin, I'd like to remind everyone that today's discussion will include forward-looking statements within the meaning of securities laws. These statements are based on our current expectations and assumptions and involve risks and uncertainties that could cause actual results to differ materially.
Please refer to our filings with the SEC for a discussion of these risks. We will also reference certain non-GAAP financial measures. Reconciliations to the most directly comparable GAAP measures can be found in our earnings materials. With that, I'll turn the call over to Kyle.
Thanks, Devin, and good morning, everyone. On our last call, we covered the MV250 debut at Farnborough, eIPP launch with United Therapeutics carrying organs, motor certification policy interpretation issues, and an aircraft backlog approaching the year-end goal of $4 billion. This morning, we will cover the commercial, military, and certification momentum and financials through this last quarter. Quarter three was the strongest revenue quarter in BETA history. We beat the midpoint of our Q3 guidance by more than 50%. We also crossed more than a quarter million nautical miles of electric flight. We launched service in six eIPP sites, including Florida this past week. Our exceptionally strong partnership and collaboration with GE continues to make us a better company, and in September, we beat delivery promises to Embraer Eve's program.
We also hosted Chairman Jovanovic from the EXIM Bank and continue to advance the $830 million financing package to fund our domestic manufacturing and vertical integration expansion. More recently, on October 16, we earned the FAA market survey airworthiness certificate for the ALIA A250 N250XT, marking the first eVTOL aircraft in history to receive one. Four days after receiving this authorization, we flew the first vertical-to-vertical market survey flight, New York to Vermont across Lake Champlain. It was a 34 nautical mile flight in less than 20 minutes. That is a drive that typically takes an hour and a half and includes a ferry. A few years ago, BETA was the very first to fly piloted eVTOL transition flights on full-scale aircraft. We were the first to produce a training-compliant eVTOL and qualify many pilots to fly.
Now, we are the first to earn an FAA authorization to give prospective customers the experience of an eVTOL aircraft through vertical takeoff, transition to wing-borne flight, and vertical landing. Getting here has required years of work. Each step builds on the foundation for the next. Our maniacal focus on simplicity has driven this progress, and it remains central to how we certify, manufacture, and commercialize our aircraft. As the eVTOL industry advances towards certification and commercialization, FAA authorizations provide concrete and objective measures of progress. This authorization had several prerequisites. We had to show stable flight in every corner of the flight envelope, covering all flight load cases and speeds. We had to show stability in all wind conditions, both vertical and runway landings. We had to produce maintenance manuals and implement a maintenance program.
Most importantly, we had to have a stable aircraft configuration across a meaningful number of flight hours. A focus on the customer has led us to a deliberate choice to remove complexity. No liquids, no gearboxes, no complex software algorithms, no extra blades, no thrust vectorings, no propeller actuators. Simpler systems have fewer failure modes. Fewer failure modes means the aircraft is available when the operator needs it, and it is generating revenue. BETA now holds an FAA market survey authorization for both our CTOL and our VTOL aircraft. Both are built on a simple, common platform, sharing the same wing, tail, flight control systems, motors, and batteries. They are manufactured on the same production lines. That commonality allows progress in each certification program to support the other. Shifting to our defense business. In September, the CX300 flew at the Miramar Air Show by invitation.
We were the first electric aircraft to fly at that military air show. The hybrid and autonomous MV250 was on static display, and our prospective customers really dug into the detail of the aircraft. The response we are hearing from the defense community is direct and consistent. There is an existing capability gap we can fill with longer range, faster speeds, a very small logistics tail, autonomy, and we can do it at a significantly lower upfront and recurring operational cost. The MV250 builds on our commercial A250 platform, sharing its wing, tail, electric motors, flight controls, and other core systems, achieving near total technical commonality. By adding the Sikorsky MATRIX autonomy and the GE BETA turbogenerator for hybrid operation, and a fuselage design for uncrewed military missions, we deliver enhanced military performance without the time and cost of a clean sheet design.
This foundational dual-use architecture allows the MV250 to immediately inherit the manufacturing economies of scale, an existing supply chain, and the flight time from our commercial programs. We have had very strong engagement at all levels of the armed services, and we have seen commercial demand for hybrid and autonomous systems as well. We are currently assembling our second hybrid VTOL aircraft, with the components for a third demonstration aircraft coming together. We will have more to share soon. Transitioning over to our eIPP projects that went live since our last call. We now have launched six of the seven programs that we were awarded. We brought the aircraft to the customer operations. We flew their routes, their schedules, and their conditions. We showed them what dispatch reliability looks like when there is no fuel system, no hydraulics to troubleshoot, and no oil to change.
We flew in good weather and in bad weather. We showed them a very low cost per flight hour. We showed up early, quietly tested the routes, and delivered in every case. With these selections live, cargo moving, and medical transport happening, operators are building the institutional knowledge that will turn a pilot program into long-term commercial relationships. Phase 1 of the eIPP is about three things. One, proving mission closure. Two, demonstrating measurable cost savings. And three, building a record of safe and reliable operations. We are generating the data that will inform the policy for this entire category. Our components business continues to grow faster than we forecasted and has its own $1 billion backlog. We put our motors, batteries, flight control computers, and other systems into other companies' aircraft, potentially creating long-term service and parts relationships. We are presented with many more opportunities than we take.
We run each of these opportunities through a rigorous evaluation to ensure it is aligned with BETA's overall development and commercial strategies. We have also recently invested in large-format composite manufacturing capabilities. We are building FAA-conforming composite and metallic structure for our flight test aircraft. We have brought precision, traceability, and quality controls together on the factory floor. We have consistently made the strategic choice to spend capital on vertical integration. It is not only in composites. It is also in the motors, the batteries, and the flight control computers. This vertical integration has allowed us to move extremely quickly and keep our cost of bill of materials in check. Our loan application with the EXIM Bank for an additional $830 million financing package continues to advance to support our vertical integration and production.
We expect to be the first company in advanced air mobility to reach a maturity level that allows access to this scale of non-dilutive debt capital. Onto KPIs. At the beginning of this year, we set five aggressive year-end targets: book $4 billion in aircraft backlog, cross a quarter million nautical miles of flight, secure 150 charging sites, prove a 4.5 aircraft per month production rate, and advance certification. Today, 2 months early, three of the five are complete. Our commercial aircraft backlog stands at just over $4 billion, with over 1,000 aircraft in firm and option orders backed by financial commitments. Our recent sales focus has been on securing high-quality medical and cargo CTOL customers to support a successful entry into service. Airline customers continue to struggle with high fuel prices and are watching the eIPP missions closely, specifically for the realized cost savings.
Our sales organization has successfully established a service and support organization, and they developed a comprehensive forecasting and aircraft data awareness application called BETA Operate. This will be the backbone of the customer support channel into BETA in the future. As of this call, we have crossed a quarter million nautical miles flown. When we set that target, we thought it was achievable, but hard. The all-weather IFR capability, high reliability, and high dispatch rates are the drivers behind us reaching this goal more than 2 months in advance. The aircraft have been flying in the snow and the sleet here in the Northeast. They been to New Zealand, Australia, Japan, Hawaii, across the country many times, into Florida humidity, into the desert, into the Arctic, and the Nordics, 14 countries in total. The exposure to a variety of environmental and operating conditions has made our aircraft better.
We are at 168 charging sites, ahead of our year-end target of 150. These are not urban showcase installations. They are in the communities our eIPP operators serve: hospitals, regional airports, emergency response staging areas. That infrastructure is where the missions are. In manufacturing, we continue to make meaningful progress towards our target of demonstrating a production capacity equivalent to 4.5 aircraft per month. Our focus at this stage is on establishing and validating the manufacturing capability we will need when we ramp production on certified aircraft, rather than staffing for sustained production at this rate today. We already demonstrated capacity of 4.5 aircraft per month across several key vertically integrated component lines, including flight control computers, battery packs, wire harnesses, and inverters. We are now extending that work across our major airframe structures through targeted pulse builds.
FULL TRANSCRIPT
Continue the full translated transcript in StockNow.
Log in to unlock every statement, the English original, and speaker-by-speaker history.
Log in for the full transcriptCall participants
13 people spoke on this call — only 2 are shown here.
PARTICIPANT LIST
View participant details in StockNow.
Log in to see executives and analysts, their roles, and complete speaking history.
Log in to view all participantsKeep exploring
