Power Integrations 2026 Q3 Earnings Call
Review the key takeaways and the transcript of this earnings call.
- Q3 revenue was $125.5 million, up 6% from a year ago and 5% sequentially, led by strong growth from GaN products.
- Non-GAAP gross margin was 55.2%, above the high end of outlook; non-GAAP operating expenses were $42.4 million, down $2.8 million sequentially and more than 10% from Q3 of last year.
- Non-GAAP operating margin was 21.4%, up more than 4 points sequentially and more than 7 points higher than the full year 2025 figure; non-GAAP earnings were $0.46 per diluted share, up 24% sequentially and 28% year over year.
- Cash flow from operations was $43 million, CapEx was $6 million, and free cash flow was $37 million; cash and investments increased by $25 million to $288 million.
- Balance sheet inventory fell by more than $7 million, with days on hand down 19 days to 246 days at quarter end, while channel inventory increased by 4.5 weeks to 11.8 weeks.
- The Board raised the quarterly dividend to $0.22 per share beginning in Q1 '27.
STOCKNOW INSIGHTS
Continue with outlook and guidance.
Log in to unlock executive comments and Q&A highlights.
Log in for the full summaryStockNow uses AI to translate and summarize earnings calls. Accuracy and completeness are not guaranteed.
Transcript
Preview the first fifteen paragraphs, organized by speaker.
I will now hand the conference over to Joe Shiffler, Director of Investor Relations. Please go ahead. Thanks, Ben.
Good afternoon, everyone. Thanks for joining us. With me on the call are Jen Lloyd, our CEO, and our CFO, Nancy Erba. After Jen and Nancy's prepared remarks, we will open it up for questions. Slides accompanying today's earnings release and conference call can be found on our investor website at investors.power.com. Our discussion today will include forward-looking statements denoted by words like will, expect, should, outlook, forecast, and similar expressions that look toward future events or performance. Such statements are subject to risks that may cause actual results to differ from those projected or implied. Such risks are discussed in today's press release, in our most recent annual report on Form 10-K, and in subsequent quarterly reports on Form 10-Q. During this call, we will refer to financial measures not calculated according to GAAP.
Non-GAAP income statement measures exclude stock-based compensation expenses, amortization of acquisition-related intangible assets, accruals for a judgment in a legal matter, a restructuring charge recognized in the first quarter of 2026, and the tax effects of these items. A reconciliation of non-GAAP measures to our GAAP results is included in today's press release and in the accompanying slides. This call is the property of Power Integrations, and any recording or rebroadcast is expressly prohibited without the written consent of Power Integrations. Now I will turn it over to Jen.
Thank you, Joe, and thanks everyone for joining us. We delivered solid Q3 results with revenue up 5% sequentially, led by strong growth from GaN products. We beat our outlook on gross margin and expenses, reflecting our continued emphasis on profitability. Our non-GAAP operating margin was up more than six points year-over-year in Q3, while non-GAAP EPS rose by 28%. These results demonstrate that we are executing well across our end markets. Industrial demand remains healthy, with particular strength in energy infrastructure and rail. In fact, we currently have more demand than we can satisfy in our gate driver business due to certain supply constraints. In personal electronics and computing, we saw strong sequential growth in Q3, driven by new GaN design wins and seasonal ramps.
While memory shortages are a factor in these markets, the impact on our business is mitigated by our customer mix and new design wins. In the consumer market, which makes up a third of our sales, demand continues to be soft due largely to stagnant housing markets and higher prices for appliances, driven by tariffs and rising raw material costs. Against this uneven backdrop, we are on track to achieve our key financial and operational priorities for 2026. These include revenue growth, improved profitability in the markets we serve today, advancement of our GaN technology roadmap, and progress in our strategic pivot to the data center, EV, and energy markets to drive faster growth in the years ahead.
I am excited about our progress in each of these areas, and I will provide an update on each, starting with our core business, where growth is being led by penetration of GaN across our end markets. We are on track for a record year of GaN revenue and had another strong quarter of design wins as customers look to our GaN products to improve efficiency and reliability. That includes our first design wins with TOPSwitchGaN, which we introduced earlier this year, winning three major appliance designs at top-tier OEMs. Other wins include a recently announced smart home product for a major U.S. OEM and a TV design for a major Korean OEM using a GaN chipset addressing both AC to DC conversion and power factor correction. I will turn to data center, where our high-voltage GaN continues to open doors at customers designing 800-volt systems.
At last month's OCP Summit, we met with hyperscalers, XPU suppliers, power supply and server ODMs, and suppliers of energy infrastructure. Our discussions reinforced the demand for technologies that maximize power density and efficiency in 800-volt data centers. Engagements span applications from grid to rack, ranging from solid-state transformers and renewable energy to high-power sockets in the rack and power sidecar, as well as a diverse range of AUX power sockets throughout the data center. For high-power sockets, customers continue to show strong interest in our 1250-volt GaN to optimize power density, both by collapsing stacked power stages to reduce board area and by taking advantage of GaN's high switching frequency to shrink magnetic components. We are developing a range of high-voltage GaN products for the main power path, reflecting customer interest in a variety of integration levels and package configurations.
These products are expected to sample to customers in 2027 and then roll out in the 2028, 2029 timeframe. Auxiliary power represents our most immediate opportunity to penetrate 800-volt architectures. We are seeing strong growth this year in AUX power for existing server architectures, including five new design wins in Q3, and we have four design-ins for 800-volt sockets scheduled to begin production in 2027. Our opportunity pipeline has more than tripled since the start of the year and now includes a wide variety of 800-volt designs, including AUX supplies for compute trays, IT racks and sidecars, as well as network switches, fan power modules, and solid-state circuit breakers. In conjunction with the OCP Summit, we announced a collaboration with Ideal Power on a solution for solid-state circuit breakers. The collaboration addresses the need for innovative approaches to circuit protection in high-power, high-voltage data center environments.
where mechanical circuit breakers are too slow to protect the valuable rack equipment. Existing electronic breakers introduce losses into the system, both from the protection device itself and the surrounding control electronics. As rack power levels rise to hundreds of kilowatts and higher, any drain on system efficiency is a significant problem. An added challenge is that electronic breakers must be powered, and in 800-volt systems, the power source is usually the 800-volt bus itself. That means the AUX supply must be capable of handling an 800-volt input. So in the architecture we're developing with Ideal Power, our 1700-volt InnoMux handles the 800 volts with ample margin. We power the intelligence that controls the Ideal Power protection switch, which in turn protects the power path to the compute load.
The result is an efficient, self-powered breaker that meets the needs of 800-volt data centers, and we're excited to partner with Ideal Power on this innovative solution. Customer engagements for data center involve not just rack-level power conversion and protection, but also solutions for beyond the walls of the data center. Attach rates of battery storage systems to data centers are projected to rise rapidly in the years ahead, and we are well-positioned to capitalize with our successful high-power gate drivers. One of our top high-power customers is now supplying battery storage inverters to a top U.S. hyperscaler, with plans to ramp with multiple new customers in 2027. We added to our position in battery storage in Q3 with a high-value design win at a new customer, a major U.S. supplier of energy infrastructure.
We are also expanding our customer engagements on solid-state transformers being developed for later phases of the 800-volt transition. Our high-power gate drivers are an attractive solution for driving switching modules in silicon carbide-based SSTs, while GaN-based SSTs are an emerging application for our high-voltage GaN technology. Finally, turning to automotive, we won 10 new designs in Q3, including an inverter emergency power supply for a top German automaker, and our pipeline has increased by more than 40% since the start of the year. We believe the outlook for the EV market is promising, as higher gas prices have renewed consumer interest and the pricing delta between EVs and ICE vehicles continues to shrink. OEMs are moving to distributed power architectures in which micro DC-to-DC converters will power subsystems from the main battery instead of the lead-acid batteries.
One of our Chinese automotive customers recently announced its intention to eliminate the 12-volt battery, and we expect other OEMs to follow suit. Meanwhile, rising battery voltages are driving interest in our higher-voltage GaN, not only for low-power sockets, but also higher-power DC-to-DC converters and onboard charging. Together, these two architectural trends have the potential to dramatically increase the number of high-voltage sockets per vehicle, driving our available dollar content from single-digit dollars to nearly $100 over the next four to five years and significantly expanding our SAM. In closing, we're excited about the opportunities ahead of us in data center, energy infrastructure, and automotive. We expect these markets to drive rapid growth in our SAM, with a goal to double SAM by 2031. Our strategy for driving revenue growth in these markets is taking shape, and I'm confident in our team's ability to execute the strategy.
I'm delighted to announce a new addition to the team, Tony Stratakos, who will join us next week as our Chief Technology Officer and SVP of Engineering. Tony is a noted thought leader in power semiconductors, having founded Volterra, served as CTO at Maxim Integrated, and later founded a company specializing in utility-scale battery storage systems. I'm pleased to have Tony joining the team, and I look forward to introducing our executive team and providing an in-depth discussion of our strategy at an investor day in March 2027. Now I'll turn it over to Nancy for a review of the financial highlights.
Thanks, Jen, and good afternoon. Our Q3 results demonstrate continued progress on revenue growth, margin expansion, and cash generation. We reduced balance sheet inventory for the third consecutive quarter and announced an increase in our quarterly dividend. These results reflected disciplined execution across the company. Channel inventory increased during the quarter, reflecting both softer demand in certain markets and higher customer buffer stock requirements, which I'll discuss in more detail. Revenue for Q3 was $125.5 million, up 6% from a year ago and 5% sequentially. The communications and computer categories each grew more than 20% sequentially on a combination of seasonal strength and recent GaN design wins. The industrial category continues to show healthy growth, with a 6% sequential increase in Q3 and 13% growth year-to-date compared to last year. That strength, led by high power, has been fairly broad-based within the industrial category.
Consumer revenue was down 7% from the prior quarter, driven mainly by seasonally lower revenue from air conditioning. As Jen noted, we have seen continued softness in appliances as that market continues to feel the effects of higher retail prices and weak housing markets, especially in the U.S. and China. As previewed in my introduction, channel inventory rose by 4.5 weeks during the quarter to 11.8 weeks. Three factors drove this increase. The first is softness in appliances, where we expect sell-through to take one to two quarters to improve. The second is project delays in metering, particularly in India. We are starting to see signs of improving sell-through in metering in Q4 already and expect project launches to continue ramping through 2027. The third is channel partners building inventory to support end customers' higher buffer stock requirements.
FULL TRANSCRIPT
Continue the full translated transcript in StockNow.
Log in to unlock every statement, the English original, and speaker-by-speaker history.
Log in for the full transcriptCall participants
7 people spoke on this call — only 2 are shown here.
PARTICIPANT LIST
View participant details in StockNow.
Log in to see executives and analysts, their roles, and complete speaking history.
Log in to view all participantsKeep exploring
