Hyliion Holdings 2026 Q3 Earnings Call
Review the key takeaways and the transcript of this earnings call.
- Hyliion reported 3rd quarter 2026 revenue of $7.5 million, compared with $759,000 in the 3rd quarter of 2025 and $4.9 million in the 2nd quarter of this year.
- Revenue came from research and development services and exceeded the prior outlook of just under $5 million, primarily because work on the 800-kilowatt power module for the Office of Naval Research accelerated and approximately $3 million of additional funding became available.
- Cost of revenues was $6.9 million, gross profit was $552,000, operating expenses were $13 million, and net loss was $11.1 million.
- For the first 9 months of 2026, revenue was $15.2 million, gross profit was $1.1 million, operating expenses were $42.1 million, and net loss was $36.7 million.
- Hyliion spent $11 million during the 3rd quarter and ended the quarter with $121.4 million of cash and short and long-term investments.
- The company delivered another early adopter system to the Navy, began moving equipment to its first commercial field deployment site, and continued assembling additional early adopter units.
- Hyliion signed a $41.7 million Navy contract in July and received confirmation of an additional $3 million in funding under an existing Navy contract.
STOCKNOW INSIGHTS
Continue with outlook and guidance.
Log in to unlock executive comments and Q&A highlights.
Log in for the full summaryStockNow uses AI to translate and summarize earnings calls. Accuracy and completeness are not guaranteed.
Transcript
Preview the first fifteen paragraphs, organized by speaker.
Hello, everyone. Thank you for joining us, and welcome to the Hyliion Holdings Third Quarter 2026 Earnings Conference Call. After today's prepared remarks, we will host a question-and-answer session. If you would like to ask a question, please press star one to raise your hand. To withdraw your question, press star one again. I will now hand the conference over to Greg Standley, Chief Accounting Officer.
Greg, please go ahead. Thank you, and good morning, everyone.
Welcome to Hyliion Holdings Third Quarter 2026 Earnings Conference Call. Joining us today are Thomas Healy, Chief Executive Officer, and Jon Panzer, Chief Financial Officer. A slide presentation accompanying today's call is available on Hyliion's Investor Relations website at investors.hyliion.com. Please note that during today's call, we will be making certain forward-looking statements regarding the company's business outlook. Forward-looking statements are predictions, projections, and other statements about anticipated events that are based on current expectations and assumptions, as such, are subject to risk and uncertainties. Many factors could cause actual results to differ materially from forward-looking statements made on this call. Factors that may cause such differences are discussed in our presentation and press release, as well as our filings with the Securities and Exchange Commission.
You are cautioned not to place undue reliance on forward-looking statements, and we undertake no duty to update this information, except as required by applicable law. With that, I'll turn the call over to Thomas.
Hello, and thank you for joining us for Hyliion's Third Quarter 2026 Earnings Call. The third quarter was a very strong one for Hyliion, and once again, we have a lot to cover on today's call. I'll organize my remarks around three topics: early adopter deliveries and system performance, our growing base of military contracts and customer demand, and the manufacturing throughput and capacity work that is positioning us for 2027. First, a few highlights. On the strength of a $7.5 million third quarter, we are once again raising our full-year revenue outlook, this time to $18 million. That compares with prior forecasts for 2026 of $10 million at the start of the year and $15 million last quarter.
We are also nearing the signing of two additional military contracts that would bring our total new military awards for the year to approximately $50 million, at the high end of the range we set coming into the year. Those potential awards would be in addition to the $45.5 million of authorized funding remaining under our existing military contracts, which we plan to execute against over the coming years. During the quarter, we delivered another early adopter unit to the Navy and are nearing deployment of our first commercial unit to a customer site in the coming weeks, with some of the installation components having already been delivered to that site. Customer demand continues to grow across our target markets, and we are actively working to increase production throughput and expand capacity as we look ahead into 2027.
I'll walk through each of these areas, update you on our progress against the 2026 milestones we laid out at the start of the year, and then turn the call over to Jon for the financial results. Starting with our early adopter units. During the quarter, we delivered another system to the Navy. That unit is now being used for extended duration runs to further prove out durability of the system while operating on diesel fuel. On the commercial side, we have started moving equipment to the site of our first commercial field deployment, and we expect to complete that deployment in the coming weeks. Additional early adopter units are in assembly today. One of those will go to a second commercial site, and the balance are Navy assets supporting the USX-1 Defiant autonomous ship.
We now expect to complete the 800 kW system for the Navy ship early in the first quarter of 2027, which aligns with the Navy's schedule for integrating it aboard the USX-1 Defiant before sea trials. Thus, we expect to complete delivery of all of the early adopter systems by the date of the fourth quarter earnings release in mid-February. This progress drove third quarter revenue of $7.5 million, supporting our increased full-year outlook of $18 million. Shifting to the KARNO Power Module performance, we continue to be pleased with the performance of the systems we have in operation and with the valuable learnings they are providing. As with any new technology, we continue to identify opportunities for improvement. The encouraging trend, though, is that those findings are becoming fewer in number and reflect the kind of experience that only can be gained through extended operation.
For example, we identified a printed component that was susceptible to thermal fatigue following extended high-power operation. We have temporarily reverted back to an earlier revision of that component that we believe is not susceptible to this problem, which will keep systems moving forward. Meanwhile, we have completed a redesign of that part that we believe addresses the root cause. That issue caused some delays in the schedule, but the first redesigned components are now coming off the printers, and validation testing will soon commence. We are also making consistent progress on manufacturing quality. Each system built is becoming easier and more precise, and much of our current learnings is centered on the quality of incoming components and ensuring they consistently meet our specifications. On system power, we remain on track to achieve 200 kW of 800-volt DC power production from the KARNO Core by the end of this year.
Over the past several quarters, we have implemented numerous improvements to increase system output. One of the remaining steps is further enhancements to the regenerator, the heat exchanger that retains heat within the system throughout the power cycle. Our regenerator work earlier this year delivered a sizable power increase, and we have since identified further opportunities to improve its internal mesh density. Those new parts are now being printed, and we anticipate they will enable the 200 kW rating by year-end. Since we are talking about power output in more detail, it is worth noting how we measure power and efficiency. The 200 kW figure is a standard day rating at sea level, a common reference condition for rating power generation equipment. Just as with other technologies such as fuel cells, we are measuring the amount of power and the efficiency the KARNO Core provides to the DC bus.
Components such as fans and blowers will consume a limited amount of this power, and actual power output varies with customer configuration and ambient temperature and altitude. Rating to standard day conditions allows customers to compare the KARNO technology on an equal basis against alternative generation sources. Now shifting to our military contracts. In July, we announced a $41.7 million contract with the Navy to deliver two multi-megawatt KARNO Power Modules, and we anticipate receiving two additional contracts before the end of the year. The first is expected to be approximately $1 million with the U.S. Navy to evaluate KARNO technology for a new application. The second is expected to be with a new branch of the military and is anticipated to be approximately $7 million.
We are in the final stages of negotiating on each of these contracts and will make an announcement with additional details once the contracts are executed. We also received confirmation this past quarter that we received an additional $3 million in funding under our existing Navy contract for development of the 800 kW power module that will be installed in the USX-1 Defiant early next year. This additional funding helps support the completion of that project. Along with the $41.7 million contract we signed in July, these new awards would bring our military contracts for 2026 to a total of approximately $50 million, which is at the high end of the $40 million-$50 million range we set coming into the year.
We have signed a number of contracts with the Navy over the past few years, so let me give you a clearer snapshot of what that base means for our expected future revenue stream. Not counting the approximately $8 million in new contracts we expect to sign this quarter, we have existing contracts with $45.5 million of remaining authorized funding that we are executing on today. To put that in perspective, that remaining authority alone is roughly 2.5 times our full-year 2026 revenue outlook. We expect that the bulk of that work will be executed over the next couple of years. As we have discussed on earlier calls, we are also working to extend the pipeline of military opportunities into the future through the defense appropriations process, and we are actively seeking funding now in next year's appropriations and contracting cycle.
Finally, we see military opportunities ahead that go beyond the R&D work we perform today. As the KARNO Power Module is proven across the broad range of applications we are discussing with different branches of the armed forces, we expect those opportunities to shift increasingly toward deliveries of production power systems, not just R&D services. Turning to customers, we continue to see growing demand for the KARNO Power Module across both military and commercial markets. Alongside the military opportunities I just discussed, we continue to see strong interest from data centers, commercial and industrial facilities, and numerous prime power applications. Interest in our KARNO Power Modules among data center customers continues to increase, despite growing concerns surrounding the rapid expansion of data center construction. Some of our recent customers' discussions have actually centered around our technology's ability to address local concerns related to power generation and its environmental impact.
Local power generation helps meet growing electricity needs while reducing strain on the grid. Low emissions and low noise levels address key considerations for customers and for the communities where they operate. KARNO technology's native 800-volt DC architecture aligns with the evolving power requirements of AI infrastructure, offering opportunities to reduce costs and improve overall power system efficiency. Over the past quarter, we have had meaningful discussions with customers about scaling our manufacturing capabilities to support their demand, including the printer investment required to do so. These discussions build on the manufacturing investment framework we shared on our last call. As a reminder, we anticipate reaching a point where approximately $1.5 million invested in manufacturing equipment supports one megawatt of annual production capacity, which, at our current pricing expectations, represents approximately $2.5 million-$3 million worth of annual revenue.
FULL TRANSCRIPT
Continue the full translated transcript in StockNow.
Log in to unlock every statement, the English original, and speaker-by-speaker history.
Log in for the full transcriptCall participants
9 people spoke on this call — only 2 are shown here.
PARTICIPANT LIST
View participant details in StockNow.
Log in to see executives and analysts, their roles, and complete speaking history.
Log in to view all participantsKeep exploring
