General Fusion Group 2026 Q3 Earnings Call
Review the key takeaways and the transcript of this earnings call.
- General Fusion completed its business combination with Spring Valley Acquisition Corp III and became the world's first publicly listed fusion company, trading on the NASDAQ under ticker symbol GFUSE.
- In October, LM-26 achieved a world-first compressional plasma heating result using practical low-speed compression: electron temperatures exceeded 12 million degrees Celsius, or more than 1 keV, and ion heating reached 0.46 keV, a 2-fold increase above the starting ion temperature.
- The result was measured using Thomson scattering in collaboration with the UK Atomic Energy Authority and corroborated by Absolute Extreme Ultraviolet Diagnostics; General Fusion and UKAEA co-authored a peer-reviewed paper on the result.
- General Fusion ended September with $140.9 million in cash and short-term investments and no debt on the balance sheet.
- Adjusted operating loss was $11 million in the 3rd quarter of 2026 and $29.5 million for the first 9 months of 2026, compared with $5.3 million and $19 million, respectively, in the same periods of 2025.
- The year-over-year increase in adjusted operating loss was primarily driven by growth, increased headcount, ramp-up of LM-26 operations and upgrades, transaction-related costs, and higher general administrative costs, including D&O insurance and communications and marketing expense.
STOCKNOW INSIGHTS
Continue with outlook and guidance.
Log in to unlock executive comments and Q&A highlights.
Log in for the full summaryStockNow uses AI to translate and summarize earnings calls. Accuracy and completeness are not guaranteed.
Transcript
Preview the first fifteen paragraphs, organized by speaker.
I would now like to hand the call over to Scott Kozak.
Please go ahead. Thank you, operator.
Welcome to General Fusion's business update conference call. My name is Scott Kozak, and I am the Director of Investor Relations. With me today are Greg Twinney, Chief Executive Officer, Megan Wilson, Chief Strategy Officer, and Rob Crystal, Senior Vice President of Finance. On today's call, General Fusion will provide an update on our business and then open the phone lines for questions. This afternoon, we posted slides for this presentation on our investor relations website. As reflected in the safe harbor statements on slide two, the information set forth in the presentation and discussed during the course of our remarks in the subsequent Q&A session includes forward-looking statements, which reflect our current views of existing trends and are subject to a variety of risks and uncertainties.
You can find a discussion of our risk factors, which could potentially contribute to such differences in our Form F-1 and subsequent SEC filings, and in our final prospectus filed with the Canadian securities regulators and available at www.sedarplus.ca. I will now turn the call over to Greg Twinney, General Fusion's Chief Executive Officer.
Greg? Thanks, Scott. Good afternoon, everyone, and welcome to our inaugural quarterly earnings conference call.
General Fusion's mission is to commercialize fusion and disrupt the existing energy market. Our mission is grounded in the belief that fusion energy has the potential to truly transform how the world is energized and meet electricity demand that, according to a recent McKinsey Global Energy Perspective, is estimated to double by 2050. Fusion is often considered the holy grail of energy. That is because, upon successful commercialization, fusion has the potential to provide clean, safe, reliable, and dispatchable baseload power that does not have the safety concerns of nuclear fission or produce long-term, high-level radioactive waste. With two decades of significant science and technology development behind us, including our recent world-first results with LM26, we are making major progress on that mission. The opportunity is massive, and capturing it will take more than scientific breakthroughs.
We've known that from the beginning, and that's why our approach has been to start with the commercialization goal, prove the science as we go, and then turn to the engineering, industrialization, and deployment of fusion at scale with compelling economics. It's what General Fusion was built to do and what we are doing. With that opportunity in mind, I want to start with slide three and touch on five important attributes that we believe set General Fusion apart as a leader in the industry. First, our differentiated technology avoids some of the complexity and extreme physics requirements of traditional fusion approaches, which we believe can translate into a more viable path to commercial fusion, one that overcomes barriers other approaches will face. Second, we are purpose-built for commercialization, focused on designing a viable fusion plant that can integrate with existing power infrastructure and deliver electricity to the grid.
That means addressing key challenges like durability, fuel supply, and energy capture from the outset, rather than trying to solve for them later. Third, we have a phased, flexible, and capital-efficient approach that has allowed us to make significant technological advances while being disciplined with capital we raise and deploy. As we achieve additional major milestones, we will continue to strengthen our track record, supporting future funding needs. Fourth, we have a proven track record of building and operating fusion machines to deliver real, peer-reviewed results that have advanced our science and technology toward commercialization. And finally, we have clear and funded technical milestones in the near term that will further de-risk our technology and further showcase our ability to execute. For those of you who might be new to the story, I'll provide a little background on our company.
General Fusion was founded in 2002 with the conviction that commercial fusion needed a practical engineering approach, not just a scientific one. Our technology and approach are designed to engineer fusion into something capable of delivering clean, reliable power at scale via a conventional power plant and integrating into the grid. We are leading and driving the industry forward through a proven development pipeline of real operating systems, including prototypes, test beds, and our current commercially relevant scale Lawson machine, known as LM26, which is helping de-risk the path to practical fusion power. The lineage for Magnetized Target Fusion, or the MTF approach we employ, derives from LINUS, a program conceived by the US Naval Research Laboratory. As an initial basis for technology selection, the US Naval Research Laboratory recognized that mechanical compression of plasma could result in a practical approach to fusion energy.
General Fusion's MTF approach is inspired by the work pioneered by that LINUS program. We have been independently engineering our own version of the liquid metal technology the US Naval Research Laboratory had in mind and believe it is the right path to producing economical, commercially viable fusion energy. The entire fusion industry, including General Fusion, has benefited from decades of advances in plasma physics, high-performance computing, advanced manufacturing, and digital controls. Recent technological advances have accelerated fusion's path to commercialization, and General Fusion is at the forefront. Against that backdrop, we have achieved another industry-first milestone this summer by completing our business combination with Spring Valley Acquisition Corp. III and becoming the world's first publicly listed fusion company, trading on the NASDAQ under the ticker symbol GFUZ.
Our listing offers an unprecedented opportunity for a new and broader set of investors to participate in the General Fusion journey, transforming how the world is powered. Our North Star as a company is to become the first commercially viable source of electricity from fusion at scale, economically and reliably. We believe the real barrier to commercial fusion isn't just can we achieve the physics, but rather, can we achieve and engineer a durable, self-fueling, and cost-competitive source of electricity. I am proud to report that we achieved an important industry milestone in October. As you see here on slide five, our LM26 machine, which is at a commercially relevant scale and is designed to demonstrate fusion conditions using our unique approach, produced the world's first compressional plasma heating result. This was big news for us and the industry.
Using MTF, we achieved electron temperatures exceeding 12 million degrees Celsius, more than one keV. This result was accompanied by ion heating to 0.46 keV, a twofold increase above the starting ion temperature. Taken together, we saw plasma temperature, density, and magnetic field all increase as expected. The result was measured by the industry-recognized gold standard diagnostic, Thomson scattering, in collaboration with the UK Atomic Energy Authority, or UKAEA. This was corroborated by absolute extreme ultraviolet diagnostics, known as AXUV. As we have in the past, we documented and shared this incredible result with the fusion industry via a peer-reviewed scientific paper. What was unique about this paper was that we co-authored it with the UKAEA, providing even more validation. This is a significant result, unique to the industry in many ways.
While fusion temperatures have been achieved before by others in labs and academia, even a few companies, the difference here is that General Fusion is the first in the world to achieve one keV with practical low-speed compression. Let me explain what that means and why it's important. LM26 heated magnetized plasma by compressing it with a metal liner through relatively low-speed compression. Think milliseconds, as compared to other types of plasma compression technologies that compress much faster, in microseconds or nanoseconds. Our temperatures are increased using compression with a metal wall rather than expensive, high-powered lasers or other gear that operate in physical extremes. This method and speed of compression are advantageous for the commercialization of fusion power and its economics because they require less power, reduced system complexity, and lower cost.
This recent achievement is real, substantive progress that moves fusion, specifically General Fusion, closer to the grid than ever before. General Fusion's commercial design relies on a liquid metal wall to protect the machine from the neutrons produced by the fusion reaction, significantly improving durability, breeding tritium fuel, and efficiently capturing heat to create steam and spin a turbine, therefore solving key challenges to commercializing fusion power. Every step we take is bringing us closer to making fusion a commercially viable source of energy. Our approach to development pays off financially too. LM26's flexible, nimble design lets us produce real technical results faster and at a fraction of the cost of larger machines. We have fostered an entrepreneurial culture at General Fusion. We know how to move fast, iterate, and maximize the risk retired per dollar spent, because the world doesn't need the most expensive fusion program.
It needs practical fusion power. With this one keV milestone achieved, we are now moving on to what is next. Here on slide six is a quick look at the upgrades currently being made to the LM26 machine to go after that next milestone, 10 keV. These upgrades were anticipated from the outset and are designed to compress our plasmas to higher densities and temperatures as we advance toward 10 keV, or 100 million degrees Celsius. This is an important temperature in the fusion industry because it represents the optimum operating point for commercial fusion approaches that use deuterium-tritium fusion. After 10 keV, the third and final LM26 milestone will be to satisfy the Lawson criterion, which is necessary to deliver commercial fusion energy. The Lawson criterion is the right combination of plasma density, energy confinement time, and plasma temperature.
FULL TRANSCRIPT
Continue the full translated transcript in StockNow.
Log in to unlock every statement, the English original, and speaker-by-speaker history.
Log in for the full transcriptCall participants
8 people spoke on this call — only 2 are shown here.
PARTICIPANT LIST
View participant details in StockNow.
Log in to see executives and analysts, their roles, and complete speaking history.
Log in to view all participantsKeep exploring
