Ideal PowerIPWR
Recorded

Ideal Power 2026 Q3 Earnings Call

Review the key takeaways and the transcript of this earnings call.

PeriodQ3 2026Duration47 minParticipants6

Transcript

Preview the first fifteen paragraphs, organized by speaker.

Operator

Good morning, ladies and gentlemen, and welcome to the Ideal Power third quarter 2026 results conference call. At this time, all participants are on a listen-only mode. At the end of management's remarks, there will be a question-and-answer session. Investors can submit their questions anytime through the meeting webcast by typing them into the Q&A button on the left side of your viewing screen. Analysts who published research may ask questions on the phone line. For analysts to ask questions on the phone line, please press star one on your phone to enter the question queue, and we will open the floor for your questions and comments after the presentation. As a reminder, this event is being recorded. I would now like to turn the conference call over to Jeff Christensen.

Operator

Please go ahead. Thank you, Matthew, and good morning, everyone.

Operator

Thank you for joining Ideal Power's third quarter 2026 results conference call. On the call with me are David Somo, President and Chief Executive Officer, and Tim Burns, Chief Financial Officer. Ideal Power's third quarter 2026 financial results press release is available on the company's website at idealpower.com. Before we begin, I would like to remind everyone that a number of statements on this call are forward-looking statements. All statements on this call that are not based on historical fact are forward-looking statements. While management has based any forward-looking statements on its current expectations, the information on which such expectations were based may change.

Operator

These forward-looking statements rely on a number of assumptions concerning future events and are subject to a number of risks, uncertainties, and other factors, many of which are outside the company's control, that could cause actual results to materially differ from such statements. Please refer to the company's SEC filings for the associated risks, uncertainties, and other factors. We would also refer you to Ideal Power's website for more supporting company information. Now I will turn the call over to Ideal Power's President and Chief Executive Officer, David.

David SomoPresident and CEO

Thank you, Jeff, and good morning, everyone. Thank you for joining us today. Before I turn to the quarter, I want to spend a few minutes discussing my key takeaways from my first year with Ideal Power. Then I will cover the most significant developments since the start of the third quarter, and Tim will review our financial results. Here at the conclusion of my first year, the company is materially better positioned to advance customer opportunities through the sales funnel and into volume production orders. We assembled a leadership team and engineering team with a track record of taking power semiconductor products from development into high-volume production. We expanded our sales funnel to approximately $450 million, released new reference design kits, or RDKs, designed to accelerate customer evaluations and design-in activity, signed a long-term supply agreement with a high-volume automotive-qualified power semiconductor foundry, and achieved functional first silicon there.

David SomoPresident and CEO

We strengthened the balance sheet, providing the runway to execute our commercialization strategy, and engaged in discussions with multiple potential strategic investors. These are important accomplishments that have strengthened our foundation for commercialization. Our highest priority remains advancing customer opportunities through the funnel and into volume production orders, revenue growth, and long-term shareholder value creation. Now let me discuss what has to be better. First, we must complete JEDEC qualification and release our first B-TRAN products into volume production. Second, we need to move customer programs through the commercialization process more efficiently. Customer programs have taken longer to convert to production orders than expected. I remain confident that they will happen, but we need to accelerate the conversion of these opportunities into design-ins and revenue. Our customer engagements are broader, deeper, and increasingly focused on specific system-level application requirements. B-TRAN has continued to perform as expected in every evaluation.

David SomoPresident and CEO

Our immediate priorities are to close on our short-term customer opportunities, hyperscaler and Power Integrations initiatives, continue shipments of B-TRAN-enabled solid-state circuit breaker, or SSCB, reference design kits, continue to advance Stellantis toward a formal EV solid-state contactor program, and complete JEDEC qualification of our packaged B-TRAN devices. We continue to expect AI data center-related revenue to begin in the second half of 2027 and build over a multi-year timeframe. Building on that, I'd now like to share the most significant developments since the start of the third quarter. I'll begin by sharing my key takeaways from the October Open Compute Project Global Summit and what they mean for our commercial AI data center opportunity.

David SomoPresident and CEO

The Ideal Power sales team and I attended the summit and met with several large potential customers to introduce B-TRAN and our SSCB RDKs for consideration as they develop their solid-state circuit protection products for 800-volt DC power systems. Our industry partner in the intelligent SSCB prototype concept, designed for a hyperscaler, joined us to introduce this platform to AI data center and infrastructure providers for their consideration. The summit reinforced our confidence in the industry's direction and the expected timing of the transition to 800-volt DC infrastructure tied to the next generation of NVIDIA platforms and racks, with rollout beginning in the second half of 2027 and building over a multi-year timeframe. We will see partial retrofits of existing facilities and hybrid configurations combining AC and 800-volt DC in new builds, and ultimately new builds designed solely with 800-volt DC distribution systems.

David SomoPresident and CEO

We expect 800-volt DC power distribution to become increasingly prevalent in AI data centers to enable rack power levels that are planned to scale up to one megawatt. Migrating from AC to 800-volt DC power distribution reduces the use of copper in data centers and improves power efficiency by reducing the losses in converting high-voltage AC to low-voltage AC to DC power for use in the compute racks. This evolving power architecture environment is what our customers are designing for and creates a clear need for advanced solid-state circuit protection. I saw no evidence of any slowdown in data center investment. The AI industry is undergoing a fundamental transformation in how electricity is distributed, controlled, and protected. As computing power increases, the electrical infrastructure supporting AI data centers must become more efficient, reliable, and capable of safely handling significantly higher power levels.

David SomoPresident and CEO

The transition toward an 800-volt DC architecture creates a compelling opportunity for Ideal Power. Higher voltage DC systems require circuit protection solutions that can interrupt faults extremely quickly while minimizing energy losses during normal operation. For our customers, these advantages can translate into improved energy efficiency, reduced operating costs, smaller equipment footprints, and more reliable electrical infrastructure. Turning now to how we're advancing our intelligent SSCB initiative for AI data centers. As previously discussed, we've been working with an industry partner under a letter of intent to develop an intelligent B-TRAN-enabled SSCB prototype intended for evaluation in a U.S. hyperscaler's planned 800-volt DC development environment for the NVIDIA Rubin Ultra 800-volt DC data center power distribution architecture. We are finalizing a statement of work with our industry partner to jointly conduct an engineering study and modeling work that provides a simulation platform for the hyperscaler.

David SomoPresident and CEO

We expect the project to be confirmed and begin this quarter, and to include NRE funding. The project scope consists of load, flow, short circuit, transient, and protection coordination analyses. The study results will help define the system architecture and protection requirements, inform the timing and scope of subsequent hardware prototype evaluation, and potentially identify broader opportunities for B-TRAN integration beyond circuit protection. The sequencing has evolved from what we originally outlined. The engineering study will occur prior to the planned hardware phase, which will be based on the study's conclusions. We view this as a positive development, as it positions us to participate directly in the architectural decisions that will shape the system requirements, rather than anticipating or responding to them while the hardware phase is already in process.

David SomoPresident and CEO

We expect the study to reinforce the advantages of B-TRAN in solid-state circuit protection within data centers and pave the way for the hardware evaluation. Although the study results will be confidential, our work with the industry partner is expected to provide us with a robust intelligent circuit protection solution that can be leveraged across other hyperscalers, data center operators, and energy infrastructure providers. During the OCP Global Summit, we had multiple discussions with customers that indicated interest in collaborating on a similar engineering analysis to guide the development of their 800-volt DC AI data center power solutions. This approach involves Ideal Power at the front end of customer design decisions and can position us to become an important solid-state circuit protection supplier in their new 800-volt DC power solutions.

David SomoPresident and CEO

Moving to another important topic, we recently announced a collaboration with Power Integrations to address a critical challenge in 800-volt DC data centers. Traditional protection methods are proving to be inadequate. Mechanical breakers are too slow, while previous semiconductor-based breakers have historically been unacceptable because of high power loss. We demonstrated a working prototype together, and we are now developing a reference design for potential customers. Our collaboration delivers a self-powered, intelligent, ultra-fast SSCB that eliminates the need for an external auxiliary power supply. The solution combines Power Integrations' 1700-volt InnoMux-2 power conversion technology with Ideal Power's B-TRAN semiconductor switches in a compact architecture designed for 800-volt DC SSCBs. Let me explain why this matters. In an 800-volt DC data center, a circuit breaker needs a source of low-voltage power to operate its controls, sensors, and switching devices.

David SomoPresident and CEO

In many emerging system architectures, that auxiliary power must be derived directly from the 800-volt DC distribution bus. Power Integrations' technology efficiently converts the high voltage input into the low voltages required to operate the breaker. Our collaboration also extends our commercial reach. Power Integrations has substantially more sales and applications engineering resources than we do, and we intend to leverage this as we deliver joint reference designs to market. Turning now to our reference design kits. Our 800-volt, 63-amp SSCB reference design kit is now stocked for customers at one of our global distributors, Richardson Electronics, and they have begun accepting orders. We expect stocking orders from other distributors in the coming months. We are also taking direct orders for these RDKs and have delivered kits directly to customers to support their evaluations and accelerate product development of solid-state circuit protection solutions.

David SomoPresident and CEO

RDKs are particularly important for customers that have traditionally manufactured and sold electromechanical breakers, as they may not have the power electronics expertise in-house to rapidly develop solid-state breaker products. Our RDK can be the basis of their initial SSCB products and accelerate these customers' time to market. During the third quarter, and as discussed on our last quarterly results call, we delivered low-current, B-TRAN-enabled SSCB prototypes to a customer in Asia for internal testing and evaluation. Those SSCB prototypes were designed for 800-volt DC, 63-amp operation based on the customer's defined product specifications and aligned with end-customer requirements. We demonstrated and validated their functionality and performance prior to delivery, and now the customer can confirm the measurements of the prototype SSCBs during their evaluation process.

FULL TRANSCRIPT

Continue the full translated transcript in StockNow.

Log in to unlock every statement, the English original, and speaker-by-speaker history.

Log in for the full transcript

Other earnings calls that day

View calls from this day