ACM ResearchACMR
Recorded

ACM Research 2026 Q3 Earnings Call

Review the key takeaways and the transcript of this earnings call.

PeriodQ3 2026Duration36 minParticipants6

Transcript

Preview the first fifteen paragraphs, organized by speaker.

Operator

Good day, ladies and gentlemen. Thank you for standing by, and welcome to the ACM Research third quarter 2026 earnings conference call. Currently, all participants are in a listen-only mode. Later, we will conduct a question-and-answer session, and instructions will follow at that time. As a reminder, we are recording today's call. If you have any objections, you may disconnect at this time. I would now like to hand the conference over to your speaker today, Steven Pelayo. Please go ahead. Good day, everyone.

Steven PelayoManaging Director

Thank you for joining us to discuss third quarter 2026 results, which we released before the U.S. market opened today. The release is available on our website as well as from Newswire services. There is also a supplemental slide deck posted to the Investor section of our website that we will reference during our prepared remarks. On the call with me today are CEO David Wang, our CFO Mark McKechnie, and Lisa Feng, our CFO of our operating subsidiary, ACM Shanghai. Before we continue, please turn to slide two. Let me remind you that the remarks made during this call may include predictions, estimates, and other information that might be considered forward-looking. These forward-looking statements represent ACM's current judgment for the future. However, they are subject to risks and uncertainties that could cause actual results to differ materially.

Steven PelayoManaging Director

Those risks are described under risk factors and elsewhere in ACM's filings with the Securities and Exchange Commission. Please do not place undue reliance on these forward-looking statements, which reflect ACM's opinions only as of the date of this call. ACM is not obliged to update you on any revisions to these forward-looking statements. Certain financial results that we provide on this call will be on a non-GAAP basis, which excludes stock-based compensation and unrealized gains and losses on short-term investments, and beginning in the second quarter of 2026, its impact to net income attributable to non-controlling interests. For our GAAP results and reconciliations between GAAP and non-GAAP amounts, you should refer to our earnings release, which is posted on the IR section of our website, and to slide 13. Also, unless otherwise noted, the following figures refer to third quarter 2026, and comparisons are to the third quarter 2025.

Steven PelayoManaging Director

I will now turn the call over to David Wang.

David WangCEO

David? Thanks, Stephen. Hello, everyone, and welcome to ACM third quarter 2026 earnings conference call.

David WangCEO

We delivered strong results for the September quarter, with revenue up 37% and shipment up 31%. We attribute the growth to, one, market share gain and product cycle, and two, good execution by our production and supply chain team. Growth was led by our ECP and advanced packaging categories. I am especially pleased with the return to our growth for our cleaning categories. One, we are gaining market share with more cleaning steps and technology improvements. Two, our Lingang mini line has helped our engineers to duplicate our customer production environment and deliver technology improvements to the market much faster. And three, broader adoption of our single-wafer SPM solution across multiple customers. We are making good progress with our proprietary panel-level horizontal electroplating technology.

David WangCEO

In October, we announced the shipment to a customer in Asia of a 310 by 310 millimeter panel-level horizontal plating tool. We believe this is the world's first shipment of its kind, and it truly marks a significant milestone in our commercialization efforts. This follows earlier shipment of a larger 515 by 510 millimeter system to a mainland China customer. I will provide more detail on this later. I will now provide an update on our backlog. As reported by ACM Shanghai about a month ago, total backlog as of September 29, 2026, was $2.5 billion, an 88% year-over-year increase. The backlog includes orders across all product categories, with a heavier emphasis on our new products. Year-to-date orders through September 30 were up 147%. Thanks to good execution by our sales, production, and operation team, we continue to expect shipment to grow faster than revenue for 2026.

David WangCEO

We remain confident in our growth profile. For 2026, we see a healthy backdrop for China WFE as our customers continue to scale their production capacity. We expect an extra boost for our business from several product cycles, including SPM and furnace. Market share gains, together with strong execution, enable us to outgrow the China WFE market. We are optimistic that our newer platform will provide another source for growing as we expect the track PVD and the panel-level horizontal plating to proceed from evaluation phase into commercialization phase beginning next year. Now, onto our third quarter results. Please turn to slide three. Revenue was $368 million, up 37%. Shipments were $343 million, up 31%. Gross margin was 41.6%, and operating margin was 18%. And we ended the quarter with gross cash of $1.3 billion and net cash $0.9 billion. Now I will provide detail on product.

David WangCEO

Please turn to slide four. Revenue from single-wafer cleaning, Tahoe, and the semi-critical cleaning tool was $211 million, up 16%, and represent 27% of revenue. ACM has developed one of the industry's broadest cleaning product portfolio, spanning a full range of critical cleaning and wet processing steps. Our product, including SAPS/TEBO, Megasonic, Tahoe, backside cleaning, solvent cleaning, bevel cleaning, scrubber, wet etcher, and our proprietary sulfuric peroxide mixture of SPM technology. Semiconductor devices are becoming more complex with additional process steps and more demanding cleaning requirements. We believe our broad portfolio of differentiated technology positions ACM to capture those growing opportunities. We are fully committed to our long-term target for 60% market share in China's cleaning equipment market. Our SPM product line is a key part of the target.

David WangCEO

As a reminder, we estimate that SPM tools represent about one-third of the total cleaning equipment market, and our product cycle is just now beginning to contribute. We recently introduced our enhanced version of our 170 degrees Celsius single-wafer Hot SPM system, incorporating sulfuric acid recycling. The system achieves a 70% sulfuric acid recycle rate with reasonable particle performance. This innovation is expected to reduce sulfuric acid consumption by approximately 400 tons per tool annually, delivering meaningful environment and operating cost benefits. In October at China International Industry Fair, ACM Shanghai was presented with China International Industry Fair Innovation Achievements Awards for its single-wafer high-temperature SPM cleaning system. This is yet another award from prestigious organization, which further highlights the innovation and technology capability of our SPM platform.

David WangCEO

I am pleased to repeat today that we are on track to ship more than 20 single-wafer SPM tools across multiple customers for the full year of 2026. Beyond SPM, we continue to expand the capability and application of other differentiated cleaning technologies. Our Ultra C Tahoe now supporting additional wet etcher and monitor wafer reclaim application, providing customers with a greater process flexibility and expanding the range of addressable application, especially in the reduction for fine particle less than 19 nanometer. We are also getting more traction with our supercritical CO2 cleaning technology. Our differentiated technology with a much smaller CO2 chamber reduce CO2 usage by 30% as compared with other market solution. At the same time, we deliver better drying performance.

David WangCEO

This is a strong combination, and we are confident we can take a share with this product line and expanding application from DRAM to 3D NAND and analog application. Revenue from ECP, furnace, and other technology grow 83% and represent 30% of total revenue. Growing growth was driven primarily by strong momentum in both front-end wafer level and back-end advanced packaging electroplating application, with the furnace contribute to a relatively small portion. We see increased demand for electroplating for both logic and memory application as semiconductor manufacturing and packaging become more complex. Our proprietary panel-level horizontal plating technology is a game changer for the industry. We began development for panel-level plating for more than five years ago, and the market is now coming to us. Our patented horizontal design enable highly uniform plating across panel, including increasingly larger dimension substrate formats.

David WangCEO

Our 310 by 310 millimeter system supports copper, nickel, tin, silver, gold plating process, incorporates high-speed plating paddle technology, and supports tall copper pillar exceeding 300 micron with a good within-die uniformity. We have engaged with multiple customers across different region and panel size configurations. We also offer comprehensive set of wet processing tool for panel-level packaging, including Ultra C vac-p Flux Cleaning and Ultra C bev-p Panel Bevel Etcher and Cleaning Tool. We are confident that ACM differentiated technology position us to enable next-generation solution as driven by the increasingly complex 2.5D and 3D packaging roadmap for the global AI. Turning to our furnace business, we continue to make progress in expanding customer adoption. We are advancing our capability across key application, including silicon nitride LPCVD, polysilicon LPCVD, oxidation, thermal ALD, and plasma-enhanced ALD, addressing opportunity across both memory and logic application.

David WangCEO

We also supply high temperature, 1,150 degrees Celsius, and ultra-high temperature, 1,250 degrees Celsius, annealing furnace, especially address IGBT application. As this system complete customer acceptance and the transition into production, we expect the furnace to making more meaningful contribution to our revenue in 2027. Revenue from advanced packaging, which exclude ECP, but include service and spare parts, was up 71% and represent 13% of the revenue mix. This including coater, developer, etcher, stripper, scrubber, and vacuum cleaning tools, supporting a broader range of advanced packaging application. We are particularly pleased with our global progress here, with active deployment in Singapore and North America across a range of those tools. We believe our broader product portfolio and expanding global customer relationships position us well to capture additional opportunity as we continue to grow this business.

David WangCEO

Turning to our track and PECVD platform, we have made a progress with customer evaluation and initial deployment of our next generation system. For track, our focus remain on delivering industry-leading throughput and competitive process performance, addressing opportunity in KrF lithography, across the standalone system and configuration integrated with lithography scanners. For PECVD, we believe our differentiated chamber architecture, electrostatic chuck design, and RF power source technology provide important advantages in throughput and process performance. We are working closely with a key customer to demonstrate the performance and capability of both platforms. Looking ahead, we expect additional shipment in 2027, with revenue contribution and expected as customer qualification and production adoption progress through 2027 and into 2028. Next, I will provide the update on global manufacturing and operation infrastructure. First, Lingang. Please turn to slide eight.

FULL TRANSCRIPT

Continue the full translated transcript in StockNow.

Log in to unlock every statement, the English original, and speaker-by-speaker history.

Log in for the full transcript

Other earnings calls that day

View calls from this day