Velo3D 2026 Q3 Earnings Call
Review the key takeaways and the transcript of this earnings call.
- Velo3D reported 3rd quarter 2026 revenue of $20.5 million, up 50% from $13.6 million in the year-ago quarter.
- Revenue from 3D printers and parts was $18.8 million, up 57% from $12 million in the 3rd quarter of 2025; management attributed the increase to more systems sold, higher average selling prices and product mix, and higher Rapid Production Solutions (RPS) revenue.
- New bookings were $28.9 million, exceeding quarterly revenue, and backlog at quarter-end was $40.1 million.
- Gross margin was 26.5%, compared with 3.2% in the year-ago quarter, reflecting higher average selling prices, product mix, production volumes, manufacturing efficiencies, and fixed-cost absorption, as well as inventory reserve adjustments and cost-allocation changes.
- Operating expenses were $22.7 million, compared with $10.4 million in the 3rd quarter of 2025; non-GAAP adjusted operating expenses were $17 million, compared with $9.1 million.
- GAAP net loss was $16.7 million, or $0.52 per basic and diluted share, compared with a net loss of $11.2 million, or $0.65 per basic and diluted share; non-GAAP net loss was $10.8 million versus $9.3 million.
- Non-GAAP adjusted EBITDA was negative $9.8 million, compared with negative $7.3 million in the 3rd quarter of 2025.
- Cash and cash equivalents were $75.7 million at quarter-end, compared with $39 million at the end of 2025; outstanding debt was $7.4 million at September 30th, 2026, compared with $31 million at the end of 2025.
- Management said the strengthened liquidity position, financing activities, and debt reduction mean there is no longer substantial doubt regarding the company’s ability to continue as a going concern.
STOCKNOW INSIGHTS
Continue with outlook and guidance.
Log in to unlock executive comments and Q&A highlights.
Log in for the full summaryStockNow uses AI to translate and summarize earnings calls. Accuracy and completeness are not guaranteed.
Transcript
Preview the first fifteen paragraphs, organized by speaker.
As a reminder, this conference is being recorded. I will now turn the conference over to James Carbonara, Investor Relations. Thank you, James. You may begin.
Thank you, operator. Good afternoon, everyone, and welcome to Velo3D's third quarter 2026 earnings call. Before we begin, please note that today's call will contain forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These statements are subject to risks and uncertainties that could cause actual results to differ materially from those projected. Please refer to our press release issued earlier today, as well as our filings with the SEC, including our Form 10-K, for a discussion of these risks. We will also reference certain non-GAAP financial measures during the call. Reconciliations between GAAP and non-GAAP results can be found in today's press release, which is available on the Investor Relations section of our website. A replay of this call will also be available shortly after its conclusion. With that, I will turn the call over to our CEO, Arun Jeldi.
Good afternoon, everyone, and thank you for joining Velo3D's third quarter 2026 earnings call. The third quarter represented another important period of execution for Velo3D. As we continue building on the momentum established throughout the year, we delivered strong year-over-year revenue growth, generated bookings that exceeds quarterly revenue, and made further progress in preparing our manufacturing infrastructure to support the next phase of our growth. At the same time, we continued investing in the people, technology, and operational capabilities necessary to scale our business and serve an expanding base of customers across aerospace, defense, space, energy, and other strategically important industrial markets. Our financial performance during the quarter reflected continued demand for our metal additive manufacturing technology. Revenues increased 50% year-over-year to $20.5 million, while new bookings reached $28.9 million, exceeding revenue for the quarter.
We believe these results reflect the growing adoption of Velo3D's differentiated manufacturing platform and the continued transition of additive manufacturing from specialized applications and qualifications program toward broader production deployments. Bookings exceeding revenue is an encouraging indicator of demand, although the timing of converting bookings into revenue will continue to depend on customer requirements, production schedules, and system delivery timings. Our focus remains on converting this demand into consistent execution, strengthening customer relationships, and building a business that can support larger and more complex production programs over time. From a gross margin standpoint, we made progress during the quarter. Gross margin increased to 26.5% compared with 3.2% in the prior year period. This improvement reflected higher average selling prices, a more favorable product mix, increased production volumes, improved manufacturing efficiencies, and better absorption of fixed manufacturing costs.
Results also benefited from adjustments to our excess and obsolete inventory reserve attributable to the current period, as well as the cost allocation changes implemented during the second quarter. Operating expenses increased compared with the prior year period as we continued investing in the capabilities required to support our next phase of growth. The largest portion of this increase reflected continued investment in our Livermore production campus as we prepare the facility for expanded production. These investments are an important part of our strategy to significantly increase manufacturing capacity and position Velo3D to support larger production programs and growing customer demand. We also continued investing in our technology platform, manufacturing readiness, and operational capabilities to support the next phase of growth.
We recognize the importance of balancing these investments with financial discipline, and we remain focused on aligning our spending and capital allocation with our expected growth opportunities and long-term operating objectives. Our liquidity position remains an important foundation for executing this strategy. We ended the quarter with $75.7 million in cash and cash equivalents, compared with $39 million at the end of 2025. We have also substantially reduced our outstanding debt, which stood at $7.4 million at September 30th. Our improved balance sheet provides additional flexibility as we continue investing in manufacturing infrastructure, technology development, and the operational capabilities needed to support our customers. As a result, our strengthened liquidity position, successfully financing activities, and substantial debt reduction, we have determined that there is no longer substantial doubt regarding our ability to continue as a going concern, marking an important milestone in stabilizing our financial foundation.
At the same time, we're taking a disciplined approach to capital deployment. We now expect a substantial portion of the CapEx originally planned for 2026 to shift into 2027, as certain investments associated with our expansion are timed to align with our manufacturing ramp. The adjustment reflects a change in timing of these investments within our expansion plan, rather than a change in our long-term commitment to expanding production capabilities. One of the most significant elements of our strategy remains our Livermore production campus, Forge 1, which we opened in July 2026. The campus has commenced operations in phases and is not yet operating at scale. As we have discussed previously, Forge 1 is expected to significantly expand Velo3D's manufacturing production capacity as it is brought to full operation, and we expect it to serve as our primary production and manufacturing center.
We're continuing to bring the campus to full operation with the objective of establishing a more scalable, efficient, and integrated production environment capable of supporting demand from aerospace, defense, space, and energy customers. Livermore represents much more than an expansion of our physical manufacturing footprint. It is a foundational investment in the evolution of Velo3D into a digital manufacturing company. By consolidating production activities within a highly capable manufacturing environment, we expect to improve process consistency, strengthen quality control, and increase production visibility. Every production build also tells us a great deal about how our own systems perform machine reliability, uptime, and process stability. As production volumes increase at Forge 1, we believe applying what we learn about our own equipment and processes can help us improve system performance, shorten qualification timelines, and strengthen our software consistent with our customer agreements and the confidentiality our customers expect of these programs.
Our long-term vision is to connect digital design, manufacturing software, machine performance, and production intelligence into an integrated platform that enables customers to manufacture complex mission-critical components with greater reliability and efficiency. We believe this approach can help reduce traditional manufacturing constraints, improve supply chain flexibility, and enable customers to move more quickly from design and qualification into production. Livermore is an an important step towards realizing that vision while building the capacity and operating foundation needed to support our growth. We also continued expanding the capabilities of our distributed manufacturing network through our strategic partnership with Mears Machine Corporation. During the quarter, Mears ordered its sixth Sapphire XC system dedicated to copper-nickel additive manufacturing. This investment expands our production platform into a material system that is important for shipbuilding and offshore applications, where corrosion resistance and component performance are critical.
We believe this expansion demonstrates the versatility of our technology and the opportunity to apply our manufacturing capabilities across a broader range of strategically important markets. Copper-nickel components can support demanding marine and offshore environments, and domestic production capabilities can contribute to stronger supply chain resilience for these applications. Our partnership with Mears continues to demonstrate how qualified manufacturing partners can extend the reach of our technology while helping customers access advanced production capabilities. Beyond our commercial partnerships, we continued strengthening our position within the defense manufacturing ecosystem. Through our participation in the Government-Industry Data Exchange Program, or GIDEP, access to critical technical, quality, and reliability information supports risk management and helps Okay, I'm going to turn around.
Okay, I'm looking serving U.S. defense programs.
We believe participation in this program complements our focus on manufacturing quality, reliability, and execution as customers increasingly evaluate additive manufacturing for mission-critical applications. These capabilities are particularly important as defense and aerospace customers place greater emphasis on domestic manufacturing, supply chain security, component availability, and the ability to produce complex parts with consistent quality. Our technology is designed to address many of the manufacturing challenges associated with complex geometries and demanding performance requirements. By combining our differentiated printing capabilities with improved production infrastructure and disciplined quality process, we believe Velo3D is well-positioned to pursue opportunities as these industries expand their use of advanced manufacturing. We also strengthened our technology and operational leadership during the quarter with the appointments of Vic Fryzel as Executive Vice President of Technology and Robert Purnell as Senior Director of Operations.
These appointments reflect our continued focus on improved platform reliability, manufacturing readiness, quality, and delivery performance as we prepare Forge 1 for expanded production. As we scale our business, execution becomes increasingly important. Our ability to deliver consistently, maintain high-quality standards, support customer qualification requirements, and manage production schedules will be central to converting customer demand into sustainable growth. Strengthening our technology and operations leadership will help us build the organizational capabilities necessary to meet these requirements and support our Rapid Production Solutions offering. in 2027, we plan to introduce two products designed to increase productivity and reduce costs. The first is a removable build module that allows printers to return to production within hours instead of days, which we expect to increase output per printer without adding machines on the floor space while reducing downtime, labor costs, and material waste.
The second is a software platform designed to improve build success, simplify manufacturing, and automate production. Together, these are intended to increase production capacity and create opportunities to grow our Rapid Production Solutions revenues through higher parts per output. Looking more broadly at our commercial pipeline, we continue to see opportunities across aerospace, defense, space, energy, and other industrial markets. Customers are increasingly evaluating additive manufacturing not only for prototyping and specialized components, but also for production applications where design flexibility, part consolidation, supply chain resilience, and manufacturing performance can provide meaningful advantages. We believe this transition creates substantial long-term opportunities for Velo3D. Our platform is designed to address applications where conventional manufacturing methods can impose limitations on component geometry, development timelines, or production flexibilities.
As customers seek to modernize their manufacturing operations and strengthen their domestic supply chains, we believe our combination of technology, production capabilities, and growing manufacturing infrastructure can help address these needs. From a financial outlook perspective, we are reaffirming our full-year 2026 revenue guidance of $65 million-$75 million and our non-GAAP adjusted operating expense guidance of $45 million-$55 million. We are revising our gross margin guidance and now expect sequential improvement in gross margin in fourth quarter of 2026, compared with our prior expectation of greater than 30% gross margin in the second half of 2026. We are updating our expected capital expenditure range to $10 million-$20 million, compared with our previous range of $40 million-$50 million, primarily reflecting the shift of a substantial portion of planned capital expenditures into 2027.
FULL TRANSCRIPT
Continue the full translated transcript in StockNow.
Log in to unlock every statement, the English original, and speaker-by-speaker history.
Log in for the full transcriptCall participants
7 people spoke on this call — only 2 are shown here.
PARTICIPANT LIST
View participant details in StockNow.
Log in to see executives and analysts, their roles, and complete speaking history.
Log in to view all participantsKeep exploring
