3D Systems 2026 Q3 Earnings Call
Review the key takeaways and the transcript of this earnings call.
- 3D Systems reported 3rd quarter 2026 consolidated revenue of $99.3 million, up 10.9% year over year on an adjusted basis excluding the impact of the 2025 enterprise software divestitures.
- All 4 strategic markets grew, collectively delivering nearly 30% year-over-year growth in the quarter and nearly 25% year-to-date growth.
- Healthcare Solutions revenue was $49 million, up 14.4%, while Industrial Solutions revenue was $50.3 million, up 7.7%.
- Printer hardware systems and parts manufacturing each grew more than 25% year over year; aerospace and defense revenue grew more than 50%, excluding the Air Force development program.
- Non-GAAP gross margin was 35.5%, up 420 basis points year over year, and non-GAAP operating expenses were $36.1 million, down nearly 15%.
- Adjusted EBITDA was positive $3.1 million, a $13.1 million improvement from the prior-year period; year-to-date adjusted EBITDA was $4.4 million.
- Non-GAAP diluted loss per share was $0.06, an improvement of $0.02 from the prior-year period.
- The company ended the quarter with $120.5 million in cash and investments, including $91.8 million of cash, cash equivalents, and restricted cash, and $28.7 million of investments; debt was $96 million.
- 3D Systems opened an additional 50,000 square feet at its Littleton, Colorado facility for metal-part printers and post-print processing equipment.
- The company launched an at-the-market equity program and announced plans to exchange its 2030 secured notes for new unsecured notes due in 2031, together with cash and common stock.
STOCKNOW INSIGHTS
Continue with outlook and guidance.
Log in to unlock executive comments and Q&A highlights.
Log in for the full summaryStockNow uses AI to translate and summarize earnings calls. Accuracy and completeness are not guaranteed.
Transcript
Preview the first fifteen paragraphs, organized by speaker.
Welcome to the 3D Systems third quarter 2026 earnings webcast. At this time, all participants are in a listen-only mode. A question-and-answer session will follow the formal presentation. You may be placed in the question queue at any time by pressing star one on your telephone keypad. As a reminder, this conference is being recorded. If anyone should require operator assistance, please press star 0. It is now my pleasure to turn the call over to Monica Gould, Investor Relations.
Monica, please go ahead. Hello, and welcome to 3D Systems third quarter 2026 earnings conference call.
With me on today's call are Dr. Jeffrey Graves, President and CEO, and Phyllis Nordstrom, Chief Financial Officer. The webcast portion of this call contains a slide presentation that we will refer to during the call. Those following along on the phone who wish to access the slide portion of this presentation may do so on the Investor Relations section of our website. The following discussion and responses to your questions reflect management's views as of today only, and will include forward-looking statements as described on this slide. Actual results may differ materially. Additional information about factors that could potentially impact our financial results is included in our latest press release and our filings with the SEC, including our most recent annual report on Form 10-K and quarterly reports on Form 10-Q.
During this call, we will discuss certain non-GAAP financial measures. In our press release and slides accompanying this webcast, you will find additional disclosures regarding these non-GAAP measures, including reconciliations with comparable GAAP measures. With that, I'll turn the call over to our President and CEO, Dr. Jeffrey Graves, for opening remarks.
Thank you, Monica, and good morning, everyone. Our third quarter showed clear continued progress. Revenue grew at double-digit rates year-over-year, excluding the impact of the enterprise software divestitures we completed in 2025. Gross margins expanded, operating expenses declined significantly, and we again delivered positive Adjusted EBITDA. Phyllis will walk through the financial details with you shortly. What's most encouraging to me is not simply the numbers, but the source of the growth, accelerating penetration of our four strategic markets. These are medical technology, dental, aerospace and defense, and data center infrastructure. Customers in these markets are choosing us for the design flexibility additive manufacturing uniquely provides, together with the part quality, regulatory rigor, and very importantly, the production economics required for true manufacturing at scale. We're winning significant new business on the strength of these capabilities.
At the same time, in an increasingly unpredictable global environment, customers in both the U.S. and Europe are placing greater value on localized supply chains. With established operations in both of these regions, we're well-positioned to be a long-term partner wherever they choose to manufacture. The past three years demanded hard priority decisions and disciplined execution. Through a prolonged industry downtrend, we reduced costs while protecting the technology and application investments that matter the most. We concentrated those investments on markets where additive manufacturing creates meaningful, durable value, the four key markets we focus on today. As the headwinds now begin to recede, the benefits are becoming clear. Revenue is growing, margins are expanding, profitability is strengthening, and most importantly, customer adoption is accelerating. I want to thank our employees around the world. Their commitment has made this progress possible.
Turning to slide five, let me put the quarter in the context of those four key markets: medical technology, dental, aerospace and defense, and data center infrastructure, which includes, by the way, semiconductor equipment, advanced GPU cooling, and energy applications. In med tech, demand for both standard and personalized orthopedic implants continues to grow, driving both parts revenue and printer sales. We're expanding production capacity to meet it. Titanium remains a central focus, and the quality and economics of our titanium printing are compelling. An accelerating trend is medical-grade PEEK for personalized bone replacements, a material that combines biocompatibility, bone-like mechanical properties, and radiation transparency for X-rays and cancer treatments. We also continue to see steady growth in our Personalized Healthcare Solutions business, where we work directly with surgeons to plan procedures and deliver custom FDA-approved cutting guides and, increasingly, custom bone replacements.
Med tech continues to deliver solid growth, and with new technologies and improving economics, we expect that to continue. In dental, material revenue recovered in the third quarter as aligner volumes returned to their longer-term run rate, and adoption of our denture printing technology by labs across the U.S. and Europe continue to rise. We expect these trends to strengthen as 3D printing becomes the standard manufacturing process for dentures. In aerospace and defense, revenue grew more than 50% in the quarter, excluding our Air Force development program, led by printer sales into space launch systems and a range of other defense applications. This is a large and exciting market, though growing exposure to defense program timing may make quarterly results somewhat lumpier as we grow. On a rolling 12-month basis, however, we expect a clear upward trend. Near term, rocket propulsion applications remain the most compelling opportunities.
In data center infrastructure, semiconductor and high-performance computing revenue grew significantly. Our metal printing technology is already producing components for semiconductor manufacturing equipment and advanced computing systems, and customers added printer capacity in the quarter to support that work. We expect this area to grow and become a material revenue stream for our industrial business over time. These four markets are at the core of our growth strategy and will continue to receive the majority of our investments. The underlying technology also applies to select consumer-facing markets, allowing us to participate opportunistically in them. Moving on to slide six. Looking ahead, we see two important complementary drivers of growth, both centered on the manufacture of metal parts. Our ability to address both of these opportunities with differentiated technologies and deep applications expertise gives us a unique position in the industry.
The first of these is the continued expansion of direct metal printing for production applications. As the technology advances, customers can manufacture larger, more complex, and higher value metal components at scale. For us, the cornerstone is titanium printing, leveraging our deep expertise in printing for the human body. Those volumes are rising, and the rapid expansion of titanium applications in aerospace has opened entirely new markets. Our quality systems and infrastructure built for human applications are now a powerful advantage as we extend into the industrial markets. The second driver is the growing use of additive manufacturing within investment casting. Here, the opportunity is not to replace an established process, but to make it faster, more flexible, and capable of producing increasingly complex designs.
I'd like to cover each of these in greater detail, what's driving the market, how additive fits into the workflow, and why we believe we're well-positioned to capture the growth. Moving on to slide seven. Investment casting is essential for many high-performance metal components, particularly in aerospace and defense, from rocket propulsion systems and turbine blades to complex structural parts. Industry estimates place the global investment casting market at approximately $20 billion annually, with the U.S. representing a significant share and benefiting from strong aerospace and defense demand. For decades, the casting industry has relied on hard tooling to create molded polymer patterns. Hard tooling is expensive, slow to produce, and creates barriers to design changes once production begins. Additive manufacturing changes that equation by producing casting patterns directly from digital designs.
Customers can avoid tooling costs, dramatically reduce lead times, accelerate design iterations, and manufacture geometries that are difficult or impractical with conventional tools. The transformation of the commercial space industry illustrates what becomes possible when advances in propulsion, reusable launch systems, and modern manufacturing come together. Over the past decade, launch cadence has increased dramatically, while the cost per kilogram of reaching low Earth orbit has fallen by more than an order of magnitude compared with earlier launch systems. Additive manufacturing has contributed to this progress by enabling complex propulsion components to be developed and produced faster, with fewer parts and greater design freedom. Importantly, when additive manufacturing is used to produce casting patterns, foundries can achieve these benefits while continuing to use the alloys, casting processes, and manufacturing expertise they already trust, minimizing the need to requalify finished components. Now turning to slide eight.
As shown on slide eight, we address the investment casting market with two core printing platforms. Our new SLA 825 Dual serves large-format casting applications, while the MJP 300W Plus provides high-resolution wax patterns for smaller precision industrial and aerospace castings. While our focus today is aerospace and defense, these systems also serve a number of other high-value applications, some of which are actually illustrated on the slide. Turning to slide nine, let's look more closely at each platform, beginning with the SLA 825 Dual. This is our flagship large-format system, with roots that reach back to the invention of 3D printing in the early 1980s. The 825 is designed for large-format cast components. Its scale, precision, speed, and ability to produce lightweight, stable patterns allow customers to create large single-piece designs, reducing assembly times and lead times. Equally important is the print material and process that we use.
Historically, as production volumes rise, the economics at some point favor a transition to injection molding with hard tooling. Through our QuickCast technology, lightweight patterns that are strong and leave virtually no residue during burnout can be printed using up to 50% less resin. That savings meaningfully means changes in the economics, raising the volume threshold at which hard tooling becomes attractive, thereby favoring 3D printing and the design flexibility that it enables. These factors are rapidly transforming the investment casting industry as new designs and improved manufacturing economics drive higher adoption rates. Moving to slide 10, our newest multi-jet printing system is highlighted. While the SLA 825 is ideal for large components, the MJP 300W Plus brings high-resolution wax patterns to smaller precision investment castings, such as those used in smaller turbine engines that are rapidly expanding in use on drone aircraft, long-range munitions, and portable power systems.
The high throughput these printers enable delivers excellent economics while retaining the precision and design flexibility inherent in 3D printing. Because the wax patterns integrate directly into a customer's established lost-wax casting process, the technology can be adopted without changing the metal alloys or manufacturing methods they've already qualified and trust. Together, the SLA and MJP platforms position us to participate broadly in the casting market, with a strong emphasis on aerospace and defense applications that are growing so rapidly. Turning to slide 11, let me next turn to direct metal printing, where we see some of our most significant long-term growth opportunities. Across aerospace and defense, energy, semiconductors, and healthcare, customers are moving rapidly to adopt and expand the use of direct metal printed parts. The reasons are straightforward. The technology can now reliably meet the highest standards of quality and performance while reaching the throughput rates required in production.
FULL TRANSCRIPT
Continue the full translated transcript in StockNow.
Log in to unlock every statement, the English original, and speaker-by-speaker history.
Log in for the full transcriptCall participants
7 people spoke on this call — only 2 are shown here.
PARTICIPANT LIST
View participant details in StockNow.
Log in to see executives and analysts, their roles, and complete speaking history.
Log in to view all participantsKeep exploring
