First Breach 2026 Q3 Earnings Call
Review the key takeaways and the transcript of this earnings call.
- Third quarter net revenue was approximately $569,000, all from ammunition sales, compared with $46,000 a year ago and $95,000 in the second quarter.
- Net revenue for the 9 months reached $930,000, compared with $384,000 for all of 2025.
- The gross loss narrowed to approximately $290,000 from $652,000 a year ago.
- Third quarter GAAP net loss was $25.3 million, or $0.46 per basic and diluted share, compared with a $6.4 million loss, or $0.17 per share, a year ago.
- Third quarter expenses included $10.75 million in direct listing costs, including a $10.58 million non-cash charge for broker commissions paid in common stock, and $8.29 million in non-cash stock-based compensation.
- Research and development expense was approximately $1.23 million, primarily from drone design, engineering, and prototyping; the drone program generated no revenue in the quarter.
- First Breach ended September with $2.17 million in cash, compared with $2.48 million at the end of 2025.
- The company mutually terminated its joint venture agreement with IdeaForge in October, removing its remaining capital contribution obligation of up to $25 million, including a $10 million first tranche scheduled for this year-end; it incurred no early termination penalties.
STOCKNOW INSIGHTS
Continue with outlook and guidance.
Log in to unlock executive comments and Q&A highlights.
Log in for the full summaryStockNow uses AI to translate and summarize earnings calls. Accuracy and completeness are not guaranteed.
Transcript
Preview the first fifteen paragraphs, organized by speaker.
Good afternoon and welcome to First Breach's third quarter 2026 earnings call. Following management's prepared remarks, we will open the call for questions. I would like to turn the conference over to Frank Pogubila, First Breach's Investor Relations Lead. Please go ahead. Thank you.
Joining me today are Jeffrey Low, our Chief Executive Officer, Rick Leimbach, our Chief Financial Officer, and Jordan Low, our President and Chief Operating Officer. Before we begin, today's remarks and answers include forward-looking statements. These statements may be identified by such words as expects, estimates, targets, plans, anticipates, believes, intends, projects, may, could, and similar expressions. Actual results may differ materially from what we express or imply in those statements. For more information about factors that could cause those differences, please see the cautionary note in our third quarter earnings release and the risk disclosures in our Form 10-Q for the quarter ended September 30, 2026. The release and filing are available through our investor relations website, and the filing is also available at sec.gov. These statements speak as of the date that they are made.
We undertake no obligation to update them except as required by law. I would now like to turn it over to Jeffrey Low.
Jeffrey. Thank you, Frank. Good afternoon, everyone.
I'm proud to welcome you to First Breach's first earnings call as a public company. On August 20, our shares began trading on Nasdaq Capital Market under the symbol FBDT. We are honored to be listed on Nasdaq and humbled by the trust that comes with it. A lot of people have worked hard and for a long time to get us here. I want to thank our employees, our shareholders, our customers, and business partners, and the community that has supported us as well as we built and continue to build this company. For First Breach, the listing marks the beginning of a new phase of growth. We have a responsibility to our shareholders to be clear about how we're growing the business and how we are using capital.
We owe our customers consistent quality and dependable deliveries, and we owe our employees the training and equipment they need to do all that work. With that said, I am proud of the quarter we are reporting today. We generated approximately $569,000 of revenue, approximately 57% more than we generated in the first six months of the year combined. That is a strong quarter for us. To understand how we got here, it helps to look at what has changed. During the quarter, we brought in new loading and inspection equipment into service as we built up production. We had been inspecting rounds manually, and that step had become a bottleneck. The new inspection equipment took that bottleneck out of the process and helped us significantly increase production.
Our inspection process is designed to verify that every round we ship meets the match-grade quality standards we are known for and that our customers expect. We take much pride in that. More hours give us room to produce more, and our team is putting those hours to work, keeping up with filling orders as we ramp up to meet growing demand of our match-grade quality ammunition. in September, we announced a three-year supply distribution agreement with SAS Ammo. That gave our team a delivery schedule to plan against as we expand production. I will come back to the first month of that agreement after Rick walks through the numbers. At our ISO 9001 certified ammunition manufacturing facility of more than 80,000 sq ft, we make our own brass cups, casings, and projectiles for our three calibers of 9 millimeter, 5.56, and .223 rounds.
That level of vertical integration gives us direct control over the manufacturing process and lets us check quality at each and every step. We also have an additional 200,000 contiguous square feet under development, which we expect to use primarily for drone manufacturing, with the remainder supporting expanded ammunition production. By the end of September, we had moved from five eight-hour shifts to seven 12-hour shifts a week. That took us from 40 to 84 scheduled production hours a week. Alongside ammunition, the second part of our defense technology business is our drone program. We are developing attritable drones and pursuing counter-UAS applications. During the first quarter, our team began flight testing on close-quarters strike prototype and completed its first untethered flight. I will come back to that and what we have accomplished in testing after the quarter end.
Rick, over to you. Thanks, Jeff.
Third quarter net revenue was approximately $569,000, all from ammunition sales, compared to $46,000 a year ago and $95,000 in the second quarter. Net revenue for the nine months reached $930,000, compared with $384,000 for all of 2025. The year-over-year growth in the quarter reflected changes in our product mix and the addition of new inspection equipment. Our gross loss narrowed to approximately $290,000 from a gross loss of $652,000 a year ago. At our current production volumes, we are still spreading manufacturing costs across a relatively small number of rounds. As we expand, we will be watching how consistently we can run the equipment and how much saleable product comes off the line. Our third quarter GAAP net loss was $25.3 million, or $0.46 per basic and diluted share, compared to $6.4 million loss, or $0.17 per share a year ago.
Third quarter expenses include $10.75 million in direct listing costs. Of that total, $10.58 million was a non-cash charge for broker commissions paid in common stock. We separately recorded $8.29 million in non-cash stock-based compensation. The R&D expense was approximately $1.23 million, primarily from drone design, engineering, and prototyping. We ended September with $2.17 million in cash, compared with $2.48 million at the end of 2025. There was also a change in our capital commitments after quarter end. We mutually terminated our joint venture agreement with ideaForge in October. That removed our remaining capital contribution obligation of up to $25 million, including $10 million, which the first tranche was scheduled for this year end. We incurred no early termination penalties. With that, I'll turn it back to Jeff.
Thanks, Rick. I'd like to highlight the month of October. On a preliminary unaudited basis, we expect October revenue to exceed $600,000, which would put revenue for October alone ahead of the entire third quarter. This preliminary estimate is subject to the completion of our month-end and quarter-end closing procedures and may change. Additionally, October was our first delivery month under the SAS Ammo agreement. We shipped more than 3 million rounds and met our first monthly commitment. The agreement calls for SAS Ammo to purchase 3 million rounds a month of 5.56 and 9 millimeter ammunition through December, 5 million a month in the first quarter of 2027, and at least 8 million a month beginning April 27th, subject to terms and conditions of the agreement. Meeting that first delivery commitment is a good start. The job now is to deliver consistently as those volumes step up.
We are hiring to move to a 24-hour, seven-day-a-week manufacturing schedule. As we add people and expand operations, we are targeting a capacity of up to 20 million rounds per month. Our near term focuses on running the current schedule consistently and filling customer orders as we prepare to expand our manufacturing schedule. On drones, our close-quarters strike prototype completed its first fully autonomous flight after quarter end, something we're very proud of. It took off, followed a planned route, returned, and landed without pilot input. In a separate test, it completed a 2 km mission carrying a 500-gram payload. Our long-range strike prototype also completed its first test flight after quarter end. That platform is designed for a range of more than 20 km and a speed of approximately 120 km per hour.
We are targeting completion of the initial prototype development phase in fourth quarter and scaled production in the second quarter of 2027, subject to testing, manufacturer readiness, and available funding. As manufacturing expands, our long-term capacity target is more than 2,500 drones per week, which will depend on facility build-out, staffing, and financing. Both platforms are in flight testing, and the drone program generated no revenue in this third quarter. We have a lot of work ahead of us. The next steps are clear for our teams, keeping delivery of match-grade ammunition to customers, staff up towards around-the-clock production as we can support, and use the results from flight testing to prepare the drone platforms for manufacturing. Thank you to everyone who has helped us to get us to this point. Operator, let's take a few questions.
Thank you. We will start the Q&A with two questions submitted to the company that management would like to address. We will then take live questions from David Lavigne of Trickle Research. Thank you. The first question is, can you give us a bit more color on how the ammunition business has grown so far in the second half of the year compared to the first half?
FULL TRANSCRIPT
Continue the full translated transcript in StockNow.
Log in to unlock every statement, the English original, and speaker-by-speaker history.
Log in for the full transcriptCall participants
5 people spoke on this call — only 2 are shown here.
PARTICIPANT LIST
View participant details in StockNow.
Log in to see executives and analysts, their roles, and complete speaking history.
Log in to view all participantsKeep exploring
