Stanley Black & DeckerSWK
Recorded

Stanley Black & Decker Baird 2026 Global Industrial Conference

Review the key takeaways and the transcript of this earnings call.

Period 2026Duration30 minParticipants2

Transcript

Preview the first fifteen paragraphs, organized by speaker.

Tim WojsAnalyst

Good to go? Awesome. Good afternoon, everybody. I think it is afternoon. I am Tim Wojs. I cover building products here at Baird, and we are delighted to have Stanley Black & Decker join us again this year at our Global Industrial Conference. Stanley Black & Decker is a global provider of power tools, hand tools, outdoor products, and engineered fastening solutions, and their portfolio is highlighted by the DEWALT, STANLEY, and CRAFTSMAN brands. From the company up here, we have President and CEO Chris Nelson. He will have a couple of just kind of prepared remarks, and then we will hop into Q&A. With that, I will turn the floor to you.

Chris NelsonPresident and CEO

Great. Thanks a lot, Tim, and nice to see everybody. We just wrapped up and announced our Q3, and we are excited about the progress we are making. We posted roughly 4% organic growth, and then even while backing out the results of tariff refunds, we hit an important milestone of posting a 35% AGM, which was something we have been building to for a while. In addition to that, ahead of the game and looking good on cash flow. I think what that says to me and what is exciting about it is that we have been very consistent in our focus and our message of saying we need to control what we control and execute well, and really focused in three areas, and that is making sure that we activate our brands and focus on our brands that are our core.

Chris NelsonPresident and CEO

We are starting to see the proof points of we had two quarters in a row of organic growth in all three of our core brands. Second, we have talked about making sure that we drive operational excellence and operate with discipline, and I think that the continued progress that we see in our margin profile is encouraging there as well. Lastly, we have talked about the importance of increasing the speed of our innovation cycle, and we have been able to take out 30% of our cycle time on our new product introductions over the past couple of years, and that is really manifested itself in being able to drive more new product introductions. I just highlight there the proof point and what we are seeing in CRAFTSMAN of this being the most active launch window we have had since we acquired the brand.

Chris NelsonPresident and CEO

We feel good about staying consistent. We need to keep on. We still have a lot of work and a lot of opportunity ahead of us, but we are going to continue to focus on and control what we can control. As a part of that, the performances certainly as well as a couple of key divestitures has allowed us to get our balance sheet in great shape, and we completed a $500 million share buyback that we announced the completion of at the end of last quarter, and then the board authorized another $1 billion program going forward, which will be opportunistic for us to buy as we go forward. I think what it signals is we have more flexibility in our capital allocation, and we are excited about our value creation opportunities going forward.

Tim WojsAnalyst

Okay. Okay, great. That's a good overview. Maybe just to start off, there's a lot going on. Tariffs, input costs, you guys have your internal programs, things like that. You're back to kind of mid-single-digit growth in tools. You're talking about margin expansion maybe next year. Can you just talk through kind of the key buckets or kind of moving parts that we should think about as you go into 2027?

Chris NelsonPresident and CEO

Yeah, I think really my goal is to make the story very similar. The things that I just talked about, we've been focused, and this has not been an overnight thing. It's been a three-year cycle of getting aligned behind that focused portfolio, focused message, and driving the brand growth. So we want to keep on driving consistency and execution, and we feel good about we're going to be targeting in the 34% to 35% gross margin range next year. We feel good about the progress we're making there, and what we saw in Q3 gives us good confidence that we're heading in the right direction.

Chris NelsonPresident and CEO

Then we were able to, this year, as a result of the tariff refunds, we were able to accelerate some investments in feet on the street and some of our advertising activation of our core brands, pull those forward a little bit from 2027 into this year. Now, looking to get back into more of that 23-ish percent run rate in SG&A going forward. So really, the key for next year is consistency, continuing to drive execution in what we think is going to be We would think that we're not seeing any big changes in the marketplace that we're looking forward to going next year.

Tim WojsAnalyst

Okay. Okay. As you've come in, you've kind of refocused the business around kind of the brands as opposed to the products.

Tim WojsAnalyst

Yep. I guess from the outside, that was something that we never really fully appreciated.

Tim WojsAnalyst

Could you just talk about the progress there, what that gives you Yeah from a customer perspective, from a brand activation perspective, versus maybe just concentrating on individual product lines?

Chris NelsonPresident and CEO

Yeah. That was actually to your point, while it may seem easy, it was a big change for the company, and that was three-plus years ago when I joined the company. We were organized very much by product line, and so we had a drill team, an impact wrench team, a circular saw team, and we thought more about the products that we were going to develop in those silos. Then as we had expanded and acquired different brands, we then thought, "What brand can I put on those products that I develop?" Which is very, very different from thinking about a brand, what its position is, and then what products should I develop.

Chris NelsonPresident and CEO

As I went out and talked to customers, what I heard was, "If we were going to partner with you, we rely on you to understand how you're going to continue to allow us to grow as a company, and if I'm an end user, how you're going to continue to help me be productive and accomplish what I want." It's really difficult to tell how that looks, because I'm just hearing about product after product, and there's not a real story.

Chris NelsonPresident and CEO

Being able to then think about, now we have a DEWALT general manager, a CRAFTSMAN general manager, a STANLEY general manager, where we start with where we've positioned the brands, and I'll just use DEWALT, for example, on that professional, and then what sub-verticals we're going to target, and then what products do we need in order to be successful in those verticals with those end users and those trades? How do we then focus our investments into those products that are a part of that brand story, and then how do we invest behind that for activating those with salespeople, with promotion, et cetera? That was one big thing, and you think about just that's a big change unto itself. But secondarily, as a part of that product organization, we had engineering integrated and associated with those product groups. I talked about a drill team.

Chris NelsonPresident and CEO

You'd have drill product managers, and you'd have drill engineers, and you know what you get when you have that? You get a new drill every year, right? Whether or not you needed a drill, that's a whole different conversation. But the other thing that it drove was that innovation is in the core and the blood of what Stanley Black & Decker does, but those teams were designing and locally optimizing for a drill or an impact or whatever, and what we found was that the complexity and diversity of our componentry and our supply chain was exponential as a result. Because if you think about a power tool, it's going to be a battery, a controller, a transmission, a motor, and a shell. Different shapes, different sizes, but similar componentry. We then focused on saying, "What is the output that we need for that end user?

Chris NelsonPresident and CEO

How can we commonize some of that componentry to simplify our supply chain?" That is what's driven the speed to market, because you don't have to re-qualify, and what you should be thinking about is, "What does my end user say I need from a performance perspective?" They don't necessarily really care what type of motor controller you're using. They just care about what is it doing in the end. Those two things really changed how we operate as a company, and not only drove our focus on our brands, but some of the speed and efficiency that we've been driving as well.

FULL TRANSCRIPT

Continue the full translated transcript in StockNow.

Access every statement, the English original, and speaker-by-speaker history with StockNow Pro.

View the full transcript with Pro

Other earnings calls that day

View calls from this day