TMC the metals company 2026 Q3 Earnings Call
Review the key takeaways and the transcript of this earnings call.
- TMC reported liquidity of $123 million as of September 30, 2026, including $44 million available from its undrawn credit facility, and said its cash was sufficient to meet working capital and CapEx commitments for at least the next 12 months from today.
- TMC recorded a Q3 2026 net loss of approximately $28.4 million, or $0.06 per share, compared with a net loss of $185 million, or $0.46 per share, in Q3 2025.
- Q3 2026 exploration and evaluation expenses were $23.5 million versus $9.6 million in Q3 2025; G&A was $9.5 million versus $45.7 million; and other non-operating items were a gain of $4.6 million versus a loss of $125 million.
- Net cash used in operating activities and free cash outflow were both $19.4 million in Q3 2026, compared with $11.5 million in Q3 2025.
- TMC said its investment increased by $18 million, primarily due to $26.9 million in dilution gains, partially offset by $9.2 million for its share of the loss in its TMC investment.
- Management said industry valuation metrics had fallen since August: nickel and copper developers were valued at 34% of NAV versus about 58% three months earlier, producers at 80% versus about 100%, and TMC at 4% of the underlying net asset value per SEC-compliant technical reports.
STOCKNOW INSIGHTS
Continue with outlook and guidance.
Log in to unlock executive comments and Q&A highlights.
Log in for the full summaryStockNow uses AI to translate and summarize earnings calls. Accuracy and completeness are not guaranteed.
Transcript
Preview the first fifteen paragraphs, organized by speaker.
Please be advised that this conference is being recorded. I would now like to hand the conference over to your speaker today, Craig Shesky. Please go ahead. Thank you, Kevin.
Please note that during this call, certain statements made by the company will be forward-looking and based on management's beliefs and assumptions using information available at this time. These statements are subject to known and unknown risks and uncertainties, many of which may be beyond our control, and the company's actual results may differ materially from those anticipated. Except as required by law, we undertake no obligation to update any forward-looking statement. Our remarks today may also include non-GAAP financial measures, and additional details regarding these measures, including reconciliations to the most directly comparable GAAP measures, can be found in the slide deck being used with this call. You are welcome to follow along with our slide deck, or if joining us by phone, access at any time at investors.metals.co. I would now like to turn the call over to our Chairman and CEO, Gerard Barron.
Gerard, please go ahead. Yeah, thank you, Craig, and thanks to all of you for joining us today.
Before we dive in, I would like to take the time to welcome our new board member, Liam Mallon. Liam is a former President of ExxonMobil Upstream, and he joins us at a very exciting time as we prepare to move from exploration into commercial operations. Liam brings more than 40 years of global energy and offshore operating experience, having led ExxonMobil's worldwide upstream business, overseeing $20 billion-$30 billion in annual capital investment. He played a central role in some of the energy industry's most significant developments, from ExxonMobil's landmark offshore project in Guyana to its $60 billion acquisition of Pioneer Natural Resources. Since taking up his seat in September, we have benefited greatly from his expertise in moving complex and novel offshore operations into production.
Liam will chair our Sustainability and Innovation Committee, and he will be tasked in helping our project and environmental teams to improve project economics and manage environmental impacts. My team and I look forward to his contributions moving forward. To the agenda, we will start with U.S. permitting, where our USA-A consolidated application stands with NOAA and the milestones ahead. Offshore, we will walk through an updated plan we have built with Allseas that protects our schedule and cuts nearly $500 million from the capital needed to reach first production. Onshore, we will update you on Brownsville, where Mariana Minerals is leading feasibility-level engineering, and U.S. government funding agencies are now working together on our nodule city plan. We will also cover a capital-light option to start by toll processing our nodules in Japan.
On the environment, we will share our new peer-reviewed papers from our deep-sea dataset, published ahead of the environmental impact statement, and how the research community is putting that open data to use. We will then cover our partnerships and close with financial highlights and liquidity. Let us begin with permitting, specifically on our consolidated application over the USA-A area. Following the application's publication to the Federal Register, as reported last quarter, NOAA opened the first of several public comment periods to get the public's view on our application. The comment period closed on October 19, and NOAA is now reviewing those comments as part of its application review. Many of you were watching for certification in October, and as I shared earlier this week, NOAA has told us in a letter that it now expects to decide on certification by mid-December.
This is taking longer than we had hoped, but ours is the first consolidated application done under DSHMRA and NOAA's new review process, and the regulator is rightly following the statute step by step. Importantly, NOAA has not identified any issues or deficiency with our application. What is certification? Well, it is NOAA's formal finding that TMC has the requisite finances and access to the technologies needed to commercially collect nodules, and a rigorous plan to conduct such activities as required under the Deep Seabed Hard Mineral Resources Act. It also locks in the size and location of our area of activity and signals the transition into the final environmental review stage prior to issuance of the commercial recovery permit.
Assuming a positive certification decision in mid-December, the application will then proceed into environmental review phase, with NOAA publishing a notice of intent for this process, publication of a draft environmental impact statement, and the draft terms, conditions, and restrictions, and the required public comment periods before NOAA makes its final determination. This slide shows the remaining path for USA-A consolidated application. Since we last reported in August, NOAA has published the consolidated application in the Federal Register, and as mentioned, has completed the first of several 60-day public comment periods and online webinars. The rigor of this review is ultimately helpful to the permit's legal defensibility in the coming decades. It also helps ensure that there are no rubber stamps available for newer applicants that have not completed anywhere near the same level of work as TMC, its subsidiaries, and our world-class partners.
We've got some exciting developments with our offshore system to share. We've been working closely with Allseas on an updated offshore development plan with a clear purpose: protect our timeline, de-risk the system, and move quickly into first production upon issuance of our commercial recovery permit. Instead of starting with the full 3 million ton per annum system, we'll begin at 1 million tons per annum using an upgraded version of our proven pilot system. That cuts engineering, procurement, and integration complexity, lowers the upfront capital for both TMC and Allseas, and means we can start commercial production as soon as possible after our permit is granted during the current administration. We'll then stage the major investments alongside the production ramp-up, so less capital is at risk in the early stages. Running the system in sustained production builds operating experience, demonstrates reliability, and de-risks the move to full scale.
The result is a faster, leaner start that stays close to our original five-year ramp-up and gets the system out on the water sooner. This is good for TMC and Allseas, and ultimately good for our shareholders. The foundation of this plan is a simplified operating configuration with lower logistic cost, which builds upon the systems successfully demonstrated during our six-month offshore pilot in 2022. The vast majority of the direct CapEx reduction comes from simplifying and upgrading the existing pilot production system and eliminating the transfer vessel. This also allows us to eliminate the vast majority of long lead time items, which helps de-risk the timeline to first production, in addition to a reduction of upfront CapEx.
Collectively, changes to the scope of the system reduce the estimated upfront capital required to reach first production from roughly $800 million under our prior schedule, of which TMC's share was approximately $500 million, to roughly $300 million shared between the parties. Much of the remaining investment will be deferred to subsequent development phases. The simplified operating configuration and lower logistic cost also improve the economics of the initial operations, providing the potential to reach positive EBITDA even at the lower production volumes targeted during the first two years. So, what does this mean in practice? Well, by upgrading and scaling up the production system proven during our offshore pilot, we can reuse existing equipment and operate this upgraded system during the first two years of commercial production, deferring the full capacity equipment packages and more complex transfer interfaces until they are needed, while maintaining our original production ramp-up targets.
We plan on upgrading the existing six-meter-wide pilot collector to 9 meters, deferring the new collectors until the point we are comfortable we can sustain production over long periods of time. At the lower production rates anticipated during the early years, we can eliminate the need for a dedicated transfer vessel, instead load our nodules directly onto bulk carriers. By transshipping on U.S. West Coast before onward ship them to Japan, we can also combine nodule transport with regular offshore logistics, reducing the number of dedicated supply vessels required. Keep in mind, this is technology that both Allseas and TMC know very well, and it will undergo further optimization and testing during Allseas' upcoming Japan pilot program. So in short, the perfect proven foundation for the start of commercial operations.
Rather than deploying the full 3 million ton system from the outset, this upgraded pilot collection system will target approximately 1 million tons annually, with the potential to increase up to 1.5 million in year two. This fits with our existing production ramp-up strategy, with the objective of maintaining the planned annual production profile as we progress towards 12 million tons across four production vessels. Building on our successful 2022 pilot, with further optimization and testing planned by Allseas during the upcoming Japan pilot program, we intend to upgrade the existing collector, limit initial modifications to the Hidden Gem, and simplify offshore transport and logistics. These changes reduce complexity and both capital and operating costs. I would like to now turn over to Craig to walk through our onshore partnerships, as well as our latest environmental work and our financials.
Thanks, Jared. Onshore, again, our primary objective remains: build a greenfield processing and refining facility in Brownsville, Texas. But having it up and running in time to receive the first nodules from our offshore operations may be a challenge given our anticipated permitting timeline. That is where we may lean on, as we noted, our five-year partnership with PAMCO and their existing processing facility in Hachinohe, Japan, where they have been processing nickel laterites for many decades, and where we successfully conducted an industrial-scale pilot in 2024 to 2025. PAMCO will need to make some modifications to its plant to prepare for the arrival of first nodules, and our team and external engineering consultants have been in Hachinohe this week working through those plans, just to make sure those schedules align.
So, taking a step back, PAMCO's history of smelting nickel laterite ores goes all the way back to the 1960s, and over the years, they have built up significant processing infrastructure with three furnaces spread across the existing site. Our history of working together is a bit shorter, but we have accomplished a remarkable amount over the past five years, including industrial-scale pilot processing, demonstrating technical feasibility of the process using existing architecture, and a feasibility study demonstrating economic viability using their 80 MW furnace. But we know what needs to be done to bring the facility on spec in preparation for nodules. Suffice it to say that our discussions with the U.S. government do include the potential of this attractive option at the start of production. Certainly, members of the U.S. government are in Japan as we speak, discussing the burgeoning seafloor minerals industry.
FULL TRANSCRIPT
Continue the full translated transcript in StockNow.
Log in to unlock every statement, the English original, and speaker-by-speaker history.
Log in for the full transcriptCall participants
6 people spoke on this call — only 2 are shown here.
PARTICIPANT LIST
View participant details in StockNow.
Log in to see executives and analysts, their roles, and complete speaking history.
Log in to view all participantsKeep exploring
